I’m after the door hole seals for my 5th Gen. It’s a plastic seal sheet the site between the door and door card. I need all four please.
If there is a universal plastic sheet I can buy, please let me know.
Pictures below:
Cheers
Last edited by arif_manji on Mon Jun 22, 2020 3:54 pm, edited 1 time in total.
My Cars:
2022 Toyota Supra 3.0 GR PRO Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
I used this:
2M X 2M 1000G CLEAR HEAVY DUTY POLYTHENE PLASTIC SHEETING GARDEN DIY MATERIAL
It’s heavier duty than the original and is meant for outdoor use so just right for this use.
Fixed with this:
Butyl round cord, black, 6 mm x 8 m or 8 mm x 6 m, black
It might be worth trying to get a set from a breaker even just as a template to copy - as I seem to recall that there was some special pockets which were ultrasonically welded to the sheet.
I'm sure you will get away with just a single sheet , but there must be some design consideration in the 'pocketing' that is worth keeping (example on the right hand side of your first picture where the loom comes upwards).
I bought some inner mebrane sheeting off ebay - it was listed for vw - just looks to be plastic sheetingto me so like others have mentioned so just go with standard plastic sheet and some butyl tape - you can keep the plastic pockets in place and seal round them with the butyl.
Sure you will be treating the inner arches with dynax or dinotrol etc
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
My Cars:
2022 Toyota Supra 3.0 GR PRO Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
I would go for the dynax s50 - one with a long lance attachment - this helps get right into the double skin of the arch - one big can should do both rear inner arches. you should see some areas where the wax runs through the arch and out onto the tyres (this is a good thing im told) so do cover them up before starting. https://www.ebay.co.uk/sch/i.html?_from ... 0&_sacat=0
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC