ATTS Help needed

crazy_ed · Post by **crazy_ed** » Wed Feb 26, 2020 1:22 pm

Good day Luders

i need some help with my ATTS

i have two fault codes for oil pressure.
first ill start with fresh oil then more on from their.Done--No Change

i did a while back find the ATTS Manual online.
why i didn't save and download it then i don not know.

i cannot for the life of me find it now.
if anyone else can share it with me or send me a link that would help.

for now i need an idea of what ATF and how much i need.

Many thanks..... Many more questions to come

Post by **RattyMcClelland** » Wed Feb 26, 2020 4:34 pm

Which oil pressure sensor? There are 2, the left one is an ATTS out job to replace. Easily 12 hours labour and around £300+ for the sensor. (Seriously).

Changing the oil isnt likely to help. It uses Honda ATf fluid. Around a litre or so.

viewtopic.php?t=14886

In the end I ditched ATTS, delete plate made, driveshafts swapped and a built m2p4 mfactory lsd gearbox. ATTS proved too unreliable for me.

nalla · Post by **nalla** » Wed Feb 26, 2020 4:47 pm

Yeah,

I found the same with my original engine. Previous owner taken the ATTS bulb out of the dash, and when found out, sensor would cost £300 to £400 just to find out the fault, then could be more expense from there.

ATR84 · Post by **ATR84** » Wed Feb 26, 2020 5:47 pm

Not had a problem with my ATTS........YET. I have owned the car for over a year. Personally I think it is worth fixing because the ATTS is what makes the Type S unique and it keeps things original, if that's your thing. I would only ditch mine if there was a bigger problem. I would definitely pay for the labour and cost of getting one or both of the sensors replaced.

You could always try contacting Rich at Performance Autoworks if you are stuck, he knows these cars better than anyone.

crazy_ed · Post by **crazy_ed** » Wed Feb 26, 2020 6:25 pm

good news is i have both sensors.

id planned to leave it with a reputable Honda specialist.
but they let me down on to many occasions.

so i bought the sensors myself ( which they had advised on)

but ill just deal with it myself.

ill start with the basics and work my way.

the fault codes where both sesnors.

as i said id found the manual online some time ago and it was pretty good looking had all the data and info i was after.

but foolishy i dint save it

thanks for the help so far

Post by **RattyMcClelland** » Wed Feb 26, 2020 7:04 pm

I have a service manual. I photo each page (61

).

crazy_ed · Post by **crazy_ed** » Wed Feb 26, 2020 7:31 pm

where can i find a manual?

Post by **RattyMcClelland** » Wed Feb 26, 2020 8:11 pm

https://flic.kr/s/aHsmLD1rHB

I have photos each page. They are not in order but each page is numbered so you can save them in order.

crazy_ed · Post by **crazy_ed** » Wed Feb 26, 2020 8:22 pm

RattyMcClelland wrote: ↑
Wed Feb 26, 2020 8:11 pm
https://flic.kr/s/aHsmLD1rHB

I have photos each page. They are not in order but each page is numbered so you can save them in order.

absolute Hero

Thank you

crazy_ed · Post by **crazy_ed** » Thu Feb 27, 2020 9:37 pm

*** UPDATE ***

i changed the ATF withing the ATTS

Still no chnage.

i shall do a reset then a fault code check.

i fear it may be a out Jobby.... which i am not looking forward too.