Post
by vanzep » Tue Jan 12, 2021 5:22 pm
Below zero today and sad news that the BB1 failed its mot on quite a few items. The tester was spot on and i was able to walk round/under the car and see what needs done. Im a bit surprised at what needs done as it is only 4000 miles or so since the last MOT.
Here is a list of work that needs done for the MOT:
Handbrake just failed 1490 need to get it up to 1600
o/s front rack rod end link
n/s front cv boot split
n/s rear drop link end
Other stuff:
n/s rear trailing arm bushing deteriorated
lower dsp unit not working
small tear in pass door seal (inner)
camber out 1 deg due to bolt seized in rear lca
steering wheel slightly out/misaligned
brake pipes hard lines in wheel well need cleaned&painted (where plastic cover ends)
pass wing mirror not fully folding in/out
idle too high - need to reset/lower it before MOT retest
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC