About 2 years? And mine burns about 1 liter every 1000 kilometers, so yeah.. I've had that thought too (that they might be fouled)
Gotta find the time to pop them out and see how they're doing
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Oxygen sensor replacement - anyone went thru this?
Oxygen sensor replacement - anyone went thru this?
Anyone know where the connectors are for the O2 sensors? I have a Prelude 2.0i with the F20A4 engine and i got my catalytic converter stolen. Long story short, i cant find any plugs except an oval shaped plug thats capped off... No loose wires, and where pictures show they should be, they arent.
-
- Posts: 1347
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 19 times
- Been thanked: 228 times
Oxygen sensor replacement - anyone went thru this?
Its well underneath the car if its the same as the 2.2. You will only see the connector/loom if you jack the car up and get underneath it, you will not see it from the engine bay area at all.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
Oxygen sensor replacement - anyone went thru this?
@Scott560 Yeah, that much i already knew. I have the car jacked up and i did look underneath. Theres only 1 connector and its capped off... i doubt the guys that stole my catalytic converter did that, so... I could understand if i had loose cut wires hanging... but i have nothing at all...
- RattyMcClelland
- Moderator
- Posts: 9197
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 186 times
Oxygen sensor replacement - anyone went thru this?
Th f20a4 o2 sensor it on the bottom of the exhaust manifold.
Take the manifold heat shield off and you'll see it near the bottom of the radiator. No need to jack the car up.
Take the manifold heat shield off and you'll see it near the bottom of the radiator. No need to jack the car up.
Oxygen sensor replacement - anyone went thru this?
@RattyMcClelland Yeah... theres one after the exhaust manifold and one on the catalytic converter.... i know where the actual sensors are.. i am missing the plugs they connect to. I havent seen the old exhaust before they ripped it apart so i dont know where they did connect to. All info i see say the connectors should be on the passenger side basically hanging... but when i check underneath the car, theres nothing.
- RattyMcClelland
- Moderator
- Posts: 9197
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 186 times
Oxygen sensor replacement - anyone went thru this?
Oh sorry. I misread. I wonder if they just pull d the pipe taking the majority of the wiring with it. Maybe check the main looms for any snags or stretches and go from there.
Oxygen sensor replacement - anyone went thru this?
@RattyMcClelland Thats ok, perhaps i should`ve been more clear . Anyways. Just took a look again with someone who also had experience in cars (happend to walk by as i took the car off the jackstands). He couldnt find anything either. Its as if they werent there at all. So i guess what i need to do is figure out where that piece of wiring harness splits from the engine harness, and go from there.