Mk4 prelude blower motor and dash light issue.

Post by **vanzep** » Tue Apr 26, 2022 11:02 pm

used one on ebay
https://www.ebay.co.uk/itm/353900045954 ... SwceNiAn2X

Indigo · Post by **Indigo** » Wed Apr 27, 2022 7:22 am

That's the left side, I guess I can just cut the metal out and cable tie it on, but seems a shame to bodge a working one.

This one is available but I'm. Not sure on the site. https://www.amayama.com/en/part/honda/57470s30000

Scott560 · Post by **Scott560** » Wed Apr 27, 2022 7:40 am

amayama is well used and trusted, have ordered from them twice now no issues at all. Genuine Honda parts straight from Japan... Someone ordered some hard to get 4th gen pieces and the order was eventually cancelled, but in the most if they say in stock its in stock.

Indigo · Post by **Indigo** » Wed Apr 27, 2022 10:25 am

I will have a go with the passenger side one, it seems the only difference between the Left and right one is the metal bracket, and that can be swapped over!

K30DPC · Post by **K30DPC** » Thu Apr 28, 2022 4:33 pm

Idk but if 5gen sensor will fit I have one

Indigo · Post by **Indigo** » Fri Apr 29, 2022 9:39 pm

@K30DPC i will wait for my ebay purchase to turn up first!

Indigo · Post by **Indigo** » Sat Apr 30, 2022 8:06 pm

Fitted the sensor and it worked for a moment. Now I have punp motor over run. Probably best too give up on the abs now! Lol

Post by **ek9sid** » Sat Apr 30, 2022 9:04 pm

I seem to remember reading about reconditioning an abs pump. Could have sworn it was on here but it could be my mind playing tricks on me. Maybe worth a look? Or getting a replacement from a breaker?

Post by **Vtecmec** » Sat Apr 30, 2022 9:33 pm

Some pics of the ABS unit and a link to the guide for the pump motor overrun here......

viewtopic.php?t=790&start=470

Post by **ek9sid** » Sat Apr 30, 2022 9:52 pm

I thought I'd read it somewhere around here