Wiring Up Front Fogs? **Pics now added***

mills · Post by **mills** » Sat Jun 02, 2012 9:30 pm

Sh!t, dude, i got the switch and all the wiring here still. and i could probably remember where it all plugs in under the dash

Post by **rob quilter** » Sat Jun 02, 2012 9:41 pm

mills wrote:Sh!t, dude, i got the switch and all the wiring here still. and i could probably remember where it all plugs in under the dash

Nice one dude

Supermarine Blues · Post by **Supermarine Blues** » Tue Jun 05, 2012 4:44 pm

They plug into a loom that you clip under the radiator.

That in turn plugs into the infamous orange wire - easy end.

There is a loom-ette including a relay, fuse & switch harness that plugs into one of the CANbus spare connectors and the impossible end of the orange wire. It takes care of switch illumination dependent of the lights and stuff. I could try & locate the destructions, to see if the schematic helps.

Needless to say, I could only find the wrong orange wire. I didn't like the gauge for the power draw either, so ran in my own HD wire instead.

Supermarine Blues · Post by **Supermarine Blues** » Tue Jun 05, 2012 4:50 pm

I did. It's mostly in Japanese (Honda Access) sine mine are JDMs.

The US translation says Port#2 on the fuse box and the bolt for the relay acts as the earthing pole.

Post by **Lude-dude** » Wed Jun 06, 2012 12:52 pm

cant remember exactly where the orange wire was but I did find it.

its near the fuse box, maybe behind the carpet

funkmasterjay · Post by **funkmasterjay** » Fri Jun 08, 2012 10:51 pm

I am just going to buy one of the yellow forg light kits from US eBay and run my own looms I think.

Lude Generation

Wiring Up Front Fogs? Pics now added*