Rear Control Arm Bush

Ailfenergy · Post by **Ailfenergy** » Tue Jun 05, 2012 12:00 pm

Is it possible to get this bush somewhere without buying the whole control arm?

I've found 2 control arms on eBay, but I'm not really happy with the delivery price.
http://www.ebay.co.uk/itm/97-01-honda-p ... 804wt_1037
http://www.ebay.co.uk/itm/97-01-honda-p ... 839wt_1037

Any suggestions?

Post by **Merlin** » Tue Jun 05, 2012 9:04 pm

You could polybush it? It would be cheap.

Post by **Vtecmec** » Tue Jun 05, 2012 9:43 pm

I think the 4th gen bush fits and you can get that from Honda for about £30.

Post by **Merlin** » Wed Jun 06, 2012 10:02 am

^^ Yup part number 52354-SS0-023 @ £25 per side.

http://www.hondaoriginalparts.com/honda ... k_03=23027

judderod · Post by **judderod** » Wed Jun 06, 2012 10:43 am

If it's one of the press fit ones... I got my front's done at the dealership for 1/4 hr's labour. I'm glad I did coz they ruined one of the new ones pressing it in so they replaced it and had another go for no extra charge. Well worth it.

Post by **Merlin** » Wed Jun 06, 2012 12:36 pm

Vtecmec wrote:I think the 4th gen bush fits and you can get that from Honda for about £30.

I did this on my 5G (used 4G parts). You'll probably need to replace the bolts, nuts, and plate while your at it

Rear LCA inner bush - 52354-SS0-023
Camber bolt - 52387-SM4-962
Camber plate - 52388-SM4-960
Nut - 90366-SF1-J62

http://preludeuk.forumup.com/viewtopic. ... =preludeuk
http://preludeuk.forumup.com/viewtopic. ... =preludeuk