Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

track lude
-
- Posts: 1127
- Joined: Fri Jul 27, 2012 6:23 am
- My Generation: 4G
- PSN GamerTag: starletgt123
- Has thanked: 3 times
- Been thanked: 5 times
track lude
sorry did not no were to put this but we are tracking a 4gen lude and want ideas how to make it better round track.we have tracked it once and was very impressed have striped interror out and got drilled and grove discs and yellow stuff pads and changed fluid. next is tyres and perspex for windows. we got an other lude there to get the susspension out but it only sleve coilover things are they any good. must point out ares car is completly standerd every were. the donner car also has a header is it worth puting that on there no cracks or f all in it just a bit rusty kind of looking any imput would be great thanks
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
coilover sleeves are rubbish matey dangerous even. Uprated suspension comes up quite regularly for sale so hold out and spend a bit of money for better results.
There are a few tracklude profiles on here and one or 2 racers so get reading.
There are a few tracklude profiles on here and one or 2 racers so get reading.

bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
-
- Posts: 1692
- Joined: Wed Jul 20, 2011 1:30 pm
- My Generation: 4G
- Location: Monmouth
- Has thanked: 1 time
- Been thanked: 8 times
As merc said, get proper coilovers, look at poly bushing and uprated arbs.
Then look at performance side of things later
A good set of track tyres will help immensely.
I have a set of 16" yoko A048s i may be selling
Then look at performance side of things later
A good set of track tyres will help immensely.
I have a set of 16" yoko A048s i may be selling
Last edited by Dino on Fri Jul 27, 2012 10:52 am, edited 1 time in total.
- Merlin
- Moderator
- Posts: 12393
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 68 times
- Been thanked: 303 times
IMO these are what you should be looking at to make the Lude an accomplished track car, and roughly in this order as well:
Basic maintenence, any worn balljoints or bushes will really spoil it
Brakes (good pads Ferodo DS2500 or Hawk HP+, blank OEM style discs, Super DOT 4 fluid, braided hoses)
Decent tyres, no crappy ditch finders
Coilover suspension if possible (BC's, Tein, KSport etc...)
A wheel alignment, makes all the difference
Strut braces, even cheapo Ebay braces are better than nothing
Full polybush kit
You can go mental upgrading, but my advice is to get the basics covered first and leave power mods untill the end.
Basic maintenence, any worn balljoints or bushes will really spoil it
Brakes (good pads Ferodo DS2500 or Hawk HP+, blank OEM style discs, Super DOT 4 fluid, braided hoses)
Decent tyres, no crappy ditch finders
Coilover suspension if possible (BC's, Tein, KSport etc...)
A wheel alignment, makes all the difference
Strut braces, even cheapo Ebay braces are better than nothing
Full polybush kit
You can go mental upgrading, but my advice is to get the basics covered first and leave power mods untill the end.
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
the lude your tracking is it jdm? if so the manifold will probably hurt performance a little its great as a cheap replacement but the jdm manifold is actually not a bad piece of kit
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html