4th & 5th ES Master Set and Trailing Arm Polybush Guide

Post by **Merlin** » Wed Jan 25, 2012 11:43 am

This guide is for the 92-96 Master Set and Trailing Arm Set.

For UK and JDM 5th gens without ATTS, the 92-96 Master Set can be used however the front upper arm bushings are different. You have to buy the Type-SH front upper control arm bushes (part number - 16.3119).

The instructions that come with the Master Kit and Trailing Arm sets are a bit pap and its hard to figure out where everything goes. Here is the location with part numbers where each polybush goes:

NOTE - There are no polybushes for the rear 2WS toe arms. These are not present on 4WS cars anyway.

Front

16.3106 - Front end control arm bushing

16.7103 - Radius rods (called front strut rod set in the parts list)

16.8106 - Front shock bushing

Rear

16.3112 - Rear control arm bushing

16.8108 - Rear shock bushing

16.7105 - Rear trailing arm bushing

The bump stops and coil spring isolators are fairly self explanatory. All bushing shells must be removed except the big trailing arm.

Post by **Kawa** » Wed Jan 25, 2012 8:22 pm

awesome

Post by **Kawa** » Wed Jan 25, 2012 8:23 pm

Someone already added a wiki link

Post by **Merlin** » Thu Jan 26, 2012 9:19 am

It was meeeeeeee

Ferdie · Post by **Ferdie** » Mon Sep 30, 2013 9:48 pm

okee i hope some one understand me because i've a little issue

The trailing arm bushing is to small to fit the trailing arm!?!?!?

i've put the 3326 rubber in the trailing arm but is way to small check pics

Now i have a total of 4 round rubbers the fit nicly on the 3326 rubber
but how do you fit it on the trailing arm?

it looks like jobby

the 4 rings have the numbers

2 times 6133 and 2 times 6143

is this right? help please

Ferdie · Post by **Ferdie** » Tue Oct 01, 2013 6:15 pm

nobody???

Post by **Thebusofwoe** » Tue Oct 01, 2013 9:12 pm

Pics are not working chap.

Post by **Merlin** » Wed Oct 02, 2013 9:14 am

@Ferdie Yup the pics do not work for us.

Ferdie wrote:i've put the 3326 rubber in the trailing arm but is way to small check pics

The bush is too small to stay in the hole? Have you removed the "shell" in the trailing arm?

Ferdie · Post by **Ferdie** » Wed Oct 02, 2013 8:52 pm

Sorrry people

problem is allready fixt!

thanks anyway

Post by **Merlin** » Thu Oct 03, 2013 8:56 am

What was the problem?