abs and 4ws asp

spudep91 · Post by **spudep91** » Thu Aug 30, 2012 10:49 pm

Can i disconnect the abs and 4ws ecu without problem as they dont work anyway.

mercutio · Post by **mercutio** » Thu Aug 30, 2012 10:51 pm

no matey you can put in a 2ws rear subframe and disconect the 4ws that way but leaving the 4ws subframe there and just disconecting it is pretty dodgy

spudep91 · Post by **spudep91** » Thu Aug 30, 2012 11:05 pm

Ok thanks what bout abs

Post by **indigolemon** » Thu Aug 30, 2012 11:15 pm

Pull the bulb and the relay for the pump. You need to keep the ecu to feed speed data to the 4ws ecu.

spudep91 · Post by **spudep91** » Thu Aug 30, 2012 11:24 pm

The 4wsAnd abs light is on and does not work

Post by **paul bristol uk** » Fri Aug 31, 2012 12:01 am

Pull the codes and find out why they do not work it could be a simple fix.

h10ndr · Post by **h10ndr** » Fri Aug 31, 2012 12:28 am

^^^ this. It will probably be a rear wheel speed sensor. Nearly always is. Simple fix with 2nd hand part.

spudep91 · Post by **spudep91** » Fri Aug 31, 2012 1:09 pm

would anyone have pic of this sensor thanks

Post by **indigolemon** » Fri Aug 31, 2012 1:35 pm

Check to see if it is first man. Short the service connector, turn ignition to position two, and count the flashes on the 4ws bulb. Long flash = 10, short flash = 1.

Post by **Merlin** » Fri Aug 31, 2012 1:43 pm

Codes here: http://www.ludegeneration.co.uk/honda-p ... -t699.html