5th gen auto to manual..

Danni22 · Post by **Danni22** » Sun Sep 30, 2012 7:52 pm

Hi all I'm going to be changing from the auto box, Iv got a 98 5th gen 2.2 vtec prelude. I no ill need a fly wheel, clutch kit, pressure plate bolts, flywheel bolts, manual box, shifter tower and cables

My question is do I need a 5th gen box or will a 4th gen box fit. What code box do I need??

Also do I need a prelude shifter tower and cables or will any other honda ones for?

Thanks all

mercutio · Post by **mercutio** » Sun Sep 30, 2012 9:32 pm

any 4th or 5th gen manual box will fit matey you can use any code/box but the best one is the lsd one m2b4 or the u2q7 off the accord type r

Danni22 · Post by **Danni22** » Sun Sep 30, 2012 10:04 pm

Ahh right nice one thanks .. Do I need to change the shafts for the lengths for auto to manual change or is it the inner CVs as the drive shafts are being shortened and joined to others

Danni22 · Post by **Danni22** » Sun Sep 30, 2012 10:07 pm

+ will the auto starter motor fit the manual box?

Post by **4thgenphil** » Sun Sep 30, 2012 10:09 pm

manuals run an intermediate shaft along with a another which which replaces the one shaft on the auto's!

and the starters are dfifferent

Danni22 · Post by **Danni22** » Sun Sep 30, 2012 10:17 pm

So ill be needing new shafts, a starter motor, shift cables + tower, clutch kit, flywheel, flywheel and pressure plate bolts.

Is there anything els ill need?

Danni22 · Post by **Danni22** » Mon Oct 01, 2012 1:11 pm

Will I just need the half shaft and manual drive shaft or will the auto shaft fit onto the half shaft?

mercutio · Post by **mercutio** » Mon Oct 01, 2012 2:11 pm

no it wont you need the full manual passenger side

Danni22 · Post by **Danni22** » Mon Oct 01, 2012 5:00 pm

Thanks buddy just getting a part list together

Danni22 · Post by **Danni22** » Mon Oct 01, 2012 9:30 pm

Will I need to do any wiring?