
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Seat belts
-
- Posts: 513
- Joined: Fri Nov 11, 2011 3:05 pm
- My Generation: 5G
- XBOX GamerTag: taz8520
- Location: SE London - (Bexleyheath, Kent)
Seat belts
My font seat belts wont retract fully, I have tried brake cleaner, polish nothing seem to work
, thought I read somewhere about a lifetime warranty via Honda for them ?


- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
Re: Seat belts
I failed my last MOT for worn drivers seat belt - had to replace it with a good 2nd hand unit . Took under 20 mins to replace the part so easy to do yourself.
i wouldnt waste any time thinking Honda will replace them foc - ive never heard of anyone actually doing this in the UK - might be different in USA tho.
i wouldnt waste any time thinking Honda will replace them foc - ive never heard of anyone actually doing this in the UK - might be different in USA tho.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
In my case it was the actual belt that had started to stick a bit and then it started to wear in one particular area - you should be ok with just a little bit of wear but once it starts wearing its time to start looking for replacement belts - i tried putting clear varnish on the damaged area but it didnt work out - mind u the garage had flagged it up as an advisory on the mot so i was warned.JayJay wrote:I remember reading somewhere that fully extending them and letting them retract like a hundered times worksMy passenger side one isn't fully retracting, I might try that. Is there no way to open them up and lubricate them? Just what causes them to stop retracting?
I think it was the belt butler that did it!
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
....and duct tape for everything elsegrant_day wrote:If anythings not working properly I usually spray copious amounts of WD40 on it, it works for everything..

My 5th Gen: Project Cheapskate
Pushki wrote:I change my pants every 3000 miles or every 6 months. Whichever comes first.
old skool......i like itgrant_day wrote:duct tape is criminal. I use cable ties

My 5th Gen: Project Cheapskate
Pushki wrote:I change my pants every 3000 miles or every 6 months. Whichever comes first.