It's just not my week..! HELPPPPP

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 1:25 pm

So the clutch kit is wrong??

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 1:28 pm

Iv done some looking and apparently it should fit :/

It fits h22 h23 and f22 according to google haha

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 1:33 pm

It would fit if the pins lined up with the holes they are out

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 1:36 pm

Post by **Merlin** » Fri Nov 02, 2012 1:44 pm

There is only one way the clutch cover fits to the flywheel. Try rotating the clutch cover untill the pins line up.

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 1:48 pm

I have that's as close as it gets :/ Iv tried every hole with every stud..
That's it so its defo the clutch that's wrong we'll pressure plate

Post by **Merlin** » Fri Nov 02, 2012 1:55 pm

Do you have an OEM flywheel there for reference?

Danni22 · Post by **Danni22** » Fri Nov 02, 2012 2:00 pm

No buddy, it was an auto befor and binned off the auto flywheel

Post by **vanzep** » Fri Nov 02, 2012 9:44 pm

The OEM clutch cover has 6 bolts - I know this because i just sold some to EG-H22 as follows:
6xClutch Bolts M8x20MM 12point head - £5
@Merlin has confirmed that there are 6 of them on the Exedy clutch cover
He should also be able to tell how many flywheel bolts there are on the fidanza 8lb flywheel - my guess is 8-and from the pics others have posted it looks like 8
hope this helps

Danni22 · Post by **Danni22** » Sat Nov 03, 2012 4:52 pm

Thanks for your help lads. They've accepted it wrong and getting it sorted