window switch panel

allkiller · Post by **allkiller** » Fri Jan 04, 2013 2:43 pm

Just wondering does the panel trim around where the window switches in the door are just pull off like the radio surround ?? ( carbon look bit in picture)
only i dont want to break anything especially plastic when its cold...or do you need to pull the door panel off first ??
thanks

image sharing

mills · Post by **mills** » Fri Jan 04, 2013 5:29 pm

i think there may be a couple of screws underneath that you have to take out 1st. ive got a set that i can check to make sure though

Post by **vanzep** » Fri Jan 04, 2013 6:37 pm

there is definately one in the middle of it - you can see the plastic flap/screw head cover - pop that up and undo the screw underneath it and it should come off

mercutio · Post by **mercutio** » Fri Jan 04, 2013 9:09 pm

you have to take the door panel off buddy there are a couple of screws you can only get to from the back

Post by **Donald** » Sat Jan 05, 2013 1:01 pm

Plus the plugs for the switches.

allkiller · Post by **allkiller** » Sun Jan 06, 2013 8:40 pm

Cheers Merc ...saved snapping anything off

Nik_L · Post by **Nik_L** » Sun Jan 27, 2013 1:10 pm

Glad i found this thread, was about to pull them off as normally they are just clipped in place (albeit with the 1 screw you can see under the flap).