Please help identify this component

Dbo · Post by **Dbo** » Fri Mar 22, 2013 12:53 pm

yes

the ecu runs a dianostic at start up and anything wrong and it fires the 4ws light on

Bludge · Post by **Bludge** » Fri Mar 22, 2013 4:38 pm

thats the ecu under the metal plate yeah?

Is that sticker all i need to identify it or do i need to take it out?

Dbo · Post by **Dbo** » Fri Mar 22, 2013 4:53 pm

Hopefully someone can get it from that. wouln't hurt to just undo the metal shield and see if you have any other stickers.

will search around some posts

Dbo · Post by **Dbo** » Fri Mar 22, 2013 5:09 pm

had a look and pics i can find are P13-G00 and P13-G01 i know Robs spoon chips fit G00 only

but haven't seen yours before as P13-N01

but i think auto ecu are coded P14

sorry cant be more help

mercutio · Post by **mercutio** » Fri Mar 22, 2013 9:39 pm

the j-mt means its a jdm manual trans p13

Bludge · Post by **Bludge** » Sat Mar 23, 2013 12:08 am

thanks for the advice. I had a Google around and it would seem that the n01 indicates that its a manual ecu for a non-specific market, or its factory reprogrammed. whatever that means. I will unhook the auto box and bridge the appropriate connections to sort my reverse lights, and with a bit of luck it will magically cure my 4ws issues.

thanks for all the help in this thread!

Bludge · Post by **Bludge** » Sat Mar 23, 2013 1:03 pm

Well i bridged the power connections to remove the auto box today and unfortunately it made no difference to the 4ws.

I noticed a few other plugs that werent connected to anything, but no idea what they are. is the 4ws connect to the auto gear box at all?

Post by **Ammo** » Sat Mar 23, 2013 1:07 pm

4ws is totally separate from the engine ECU.

The ECU for the 4ws is in the boot. Have you shorted the service connector and got the error codes?

Bludge · Post by **Bludge** » Sat Mar 23, 2013 1:42 pm

Ammo wrote:4ws is totally separate from the engine ECU.

The ECU for the 4ws is in the boot. Have you shorted the service connector and got the error codes?

I cant get any error codes. when i short the connector the light comes on and goes off straight away. i thought i managed to get some codes at one point but couldnt make head nor tail of them. there is a video of them in my other thread.
I tried the holding the wheel at certain angles reset thing and it seemed like there was a loose connection as it would start blinking when i turned the wheel to the left, and go out when i turned right. its all detailed in my other thread about pulling to the left you were helping me out with.

Cant work it out.

Ah well, at least i can get the reverse lights working, small victories and all that!

Post by **Ammo** » Sat Mar 23, 2013 1:50 pm

That reset is for the 5th gen don't think it works on the 4g