CAMSHAFT LOCKING TOOL

Post by **Drax** » Mon Sep 12, 2016 2:40 pm

stinkypaul wrote:I think most cars I've worked on the tool attaches to the flywheel and not the crank pulley. Drax, you can get a universal flywheel locking tool.

@stinkypaul...oh can you..?

links?

stinkypaul · Post by **stinkypaul** » Mon Sep 12, 2016 4:15 pm

If you go on Amazon and search for flywheel tool have a look at those. There are some laser branded ones that fit in the starter motor hole. Bit of a pain but if you have to do the job on your own they might help. They are meant for Ford, Vauxhall and Citroen, but one of then should fit. There are also some on a handle for an assistant to help you with. Again these are designed for Vauxhall but should do the job.

Post by **Drax** » Mon Sep 12, 2016 9:26 pm

https://www.amazon.co.uk/Laser-3203-Fly ... wheel+tool this?

stinkypaul · Post by **stinkypaul** » Mon Sep 12, 2016 11:08 pm

On closer inspection, that one probably won't fit.
This might:
https://www.amazon.co.uk/gp/aw/d/B00BTY ... ref=plSrch

Or this:

https://www.amazon.co.uk/gp/aw/d/B003AN ... wheel+tool

This would probably be a good tool for a helper:
https://www.amazon.co.uk/gp/aw/d/B00386 ... ref=plSrch

Or this:
https://www.amazon.co.uk/gp/aw/d/B00871 ... wheel+tool

njord · Post by **njord** » Tue Sep 13, 2016 12:34 am

I've just used a thick flat blade screwdriver and stick it into the inspection hole in to the flywheel