Induction Kit & Strut Brace

sol-lude · Post by **sol-lude** » Mon Jul 12, 2021 8:46 am

Morning all,

On the hunt for an induction kit for the 5th Gen and strut brace, mainly front brace but open to both front and back if available.

Cheers

Post by **vanzep** » Mon Jul 12, 2021 4:41 pm

I have a spare 4th/5th gen rear upper strut brace - one of the cheap ebay/japspeed style ones but it would be free if u want to pick it up sometime.
I also have a aem/k&n hybrid long arm kit - proper cold air intake. Its work in progress but definately worth a look imo. Im going with a 62mm tb and types s intake just need the 62mm tb from a type s or H22a8 if u have one

sol-lude · Post by **sol-lude** » Tue Jul 13, 2021 12:13 am

vanzep wrote: ↑
Mon Jul 12, 2021 4:41 pm
I have a spare 4th/5th gen rear upper strut brace - one of the cheap ebay/japspeed style ones but it would be free if u want to pick it up sometime.
I also have a aem/k&n hybrid long arm kit - proper cold air intake. Its work in progress but definately worth a look imo. Im going with a 62mm tb and types s intake just need the 62mm tb from a type s or H22a8 if u have one

Ill not be near Edinburgh anytime soon but if your able to post ill cover costs mate.
Induction again doesnt need to be anything special just need something to get by just now before the engine swap.

Post by **vanzep** » Tue Jul 13, 2021 5:02 pm

no worries - will get some pics of the rear upper strut brace
i will hang onto the induction kit as it is still work in progress and quite a nice bit of kit imo too good just for temporary use as a stop gap

sol-lude · Post by **sol-lude** » Wed Jul 14, 2021 9:39 am

vanzep wrote: ↑
Tue Jul 13, 2021 5:02 pm
no worries - will get some pics of the rear upper strut brace
i will hang onto the induction kit as it is still work in progress and quite a nice bit of kit imo too good just for temporary use as a stop gap

Nice one mate, appreciate it. Fire over the payment details and how much you want for P&P ill fire address over

Post by **vanzep** » Thu Jul 15, 2021 11:37 am

No problem i can just bubble wrap it and send it out - should be under £10. Just wondering if Kirriemuir is classed as Highlands and hence high postage cost - maybe send me your address so i can check it out.

sol-lude · Post by **sol-lude** » Sun Jul 18, 2021 9:44 pm

vanzep wrote: ↑
Thu Jul 15, 2021 11:37 am
No problem i can just bubble wrap it and send it out - should be under £10. Just wondering if Kirriemuir is classed as Highlands and hence high postage cost - maybe send me your address so i can check it out.

Alright man sent you a pm

sol-lude · Post by **sol-lude** » Thu Jul 22, 2021 2:03 pm

Big shout to @vanzep for the rear strut bar. Quality as always.

Still on the hunt for front brace and induction pipe.