Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

My 5G Vti......

Tell us all about your Lude, you know you want to ...
User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Post by RattyMcClelland » Tue Jan 29, 2013 6:53 pm

You can paint the bumper alone but it will be a tad shade difference, but better than that.
Ideally it should be blended into each wing but that's adds cost up.

Probably around £400-500 for whole rear end. £200 for the bumper alone.
Image

Nik_L
Posts: 234
Joined: Wed Jan 16, 2013 9:48 pm
My Generation: 5G
Location: Buckhaven,Fife.

Re: My 5G Vti......

Post by Nik_L » Tue Jan 29, 2013 7:05 pm

Cheers for the advice folks.

The reputable sprayers around here are about £100 a bumper. Ive seen alot of their work and its very acceptable. Granted i could get it done cheaper from other places, but after seeing their work (painting it on the car, without number plates removed and what not) i would give them a wide berth.

I don't want to start spunking mega money on it for the sake of the bumper, its a £525 car so couldn't bring myself to spend the same amount in 1 go on some paintwork. :lol:

Right, i'll search for another bumper for another week, if nothing turns up, i will just bite the bullet and get it painted.

Actually, while i mind, Craig had some parts painted, front bumper etc, and its an acceptable match. Will give him a shout and see what he says.

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Post by RattyMcClelland » Tue Jan 29, 2013 9:05 pm

Fook me £100 is too cheap. I do £120 a corner.
Image

User avatar
Donald
Supporter 2015
Posts: 9894
Joined: Sun Jun 12, 2011 10:17 pm
My Generation: 0G
Location: Earth 3.0
Been thanked: 7 times

Post by Donald » Tue Jan 29, 2013 9:28 pm

So Ratty if say you had a scuff on a corner of each bumper from people that can't parallel park properly, you can just have those bits blended in, you don't need the whole bumper doing?

Nik_L
Posts: 234
Joined: Wed Jan 16, 2013 9:48 pm
My Generation: 5G
Location: Buckhaven,Fife.

Re: My 5G Vti......

Post by Nik_L » Tue Jan 29, 2013 9:32 pm

Its about the going rate up here for decent work. There is other guys who are more expensive, with a longer waiting list etc, but these guys do good jobs, don't charge the earth, have a quick turnaround time, have a good reputation, therefor get quite alot of work from word of mouth.

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Post by RattyMcClelland » Tue Jan 29, 2013 9:51 pm

Donald wrote:So Ratty if say you had a scuff on a corner of each bumper from people that can't parallel park properly, you can just have those bits blended in, you don't need the whole bumper doing?
Yep. But the problem is when you have large bumpers with no lines and is a dark colour. I use fade out thinners where I stop lacquering to melt the new lacquer to old.
This 2" wide fade out blend can look slightly dry and is noticable on dark colour. On light colours you will never tell. Tend to fade out in narrow areas
That why I love Doug BMW and Audi front corners. I can soft mask to the grills and fade blend there.
Image

User avatar
Merlin
Moderator
Posts: 12393
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 68 times
Been thanked: 303 times

Post by Merlin » Wed Jan 30, 2013 2:10 pm

Nik_L wrote:Its about the going rate up here for decent work.
I would agree with that. I have had my 5th done twice in 4 years and both places were in that ball park. I got front bumper & lip, bonnet, both sides, sideskirts, boot lid, rear bumper, and a big dent taken out for £900.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

Nik_L
Posts: 234
Joined: Wed Jan 16, 2013 9:48 pm
My Generation: 5G
Location: Buckhaven,Fife.

Re: My 5G Vti......

Post by Nik_L » Sun Feb 03, 2013 3:46 pm

So, today's work included...

Removing the front and side indicators, and lightly tinting them with a small jar of "smoke" paint for model R/C cars etc. Turned out pretty good i think.

And also removed the grille things that sit below the front indicators, rubbed them down and have done them black again (were colour coded and didn't like them).

Pics to follow once the lacquer dries.

Nik_L
Posts: 234
Joined: Wed Jan 16, 2013 9:48 pm
My Generation: 5G
Location: Buckhaven,Fife.

Re: My 5G Vti......

Post by Nik_L » Tue Feb 26, 2013 3:40 pm

Still no update with picture's yet but soon. Car goes to get the bumper painted either late today or tomorrow.

Also, ive fitted the old Tsudo N1 backbox from STK's Prelude. Done a deal with Vanzep for it and an intake for my Type S intake. The intake was chrome-ish (when it was new) so im in the middle of painting it in a titanium grey colour (Peugeot Storm Grey to be precise).

Nik_L
Posts: 234
Joined: Wed Jan 16, 2013 9:48 pm
My Generation: 5G
Location: Buckhaven,Fife.

Re: My 5G Vti......

Post by Nik_L » Sun Mar 03, 2013 3:49 pm

Ok so today i took a trip to the scrappies for some parts for the G/Fs Corsa, and ended up grabbing some Lude related stuff.

For my car i needed some H1 bulbs. Also spotted a cam cover that i can prep up and paint to replace the dodgy paint run induced cover that was on the car when i got it.

So with a little help from.....
Image

.......and also my hobby tool thing....

...we had this.....
Image

Still got to give it a quick rub with sand paper then hit it with some paint. Was getting a bit chilly so left it for another day.

Need to decide on what colour now. Something lairy, possibly yellow.

Post Reply

Return to “Lude Profiles”