Accelerator Cable bracket for ATR manifold

Post by **vanzep** » Fri Sep 30, 2016 10:39 am

Im looking for an accelerator cable bracket off an ATR manifold - hope that someone has a spare one kicking about

Post by **NafemanNathan** » Fri Sep 30, 2016 11:03 am

Ideally you want the Rosko Racing one which allows the cable to pull in the right position, or make a custom one.

https://www.roskoracing.com/cgi-bin/com ... ey=200-014

The ATR one makes the throttle cable come in from quite a high angle. Here's mine...

Although you could modify an ATR one by bending it back on itself.

Post by **vanzep** » Fri Sep 30, 2016 12:05 pm

cheers nafe - good info

looks like modifying a standard ATR one might be the way to go

Post by **Drax** » Fri Sep 30, 2016 12:20 pm

i may have one lying around, i can check tonight

Post by **vanzep** » Fri Sep 30, 2016 7:54 pm

thanks @Drax

Post by **Drax** » Fri Sep 30, 2016 11:15 pm

boom!!

Post by **vanzep** » Sat Oct 01, 2016 9:24 am

Nice one!

Post by **vanzep** » Fri Oct 07, 2016 2:35 pm

just wanted to say thanks to @Drax for sending me this part

ive fitted it to mani but upside down and it looks like that might work

NafemanNathan wrote:Ideally you want the Rosko Racing one which allows the cable to pull in the right position, or make a custom one.

https://www.roskoracing.com/cgi-bin/com ... ey=200-014

The ATR one makes the throttle cable come in from quite a high angle. Here's mine...

Although you could modify an ATR one by bending it back on itself.

Nafe ive had a look and just turned the ATR bracket upside down - it looks like it might work - maybe you could check this on your 5th gen