Euro-R Accord single row crank pulley

Wing8806 · Post by **Wing8806** » Mon Nov 12, 2012 1:18 am

Looking for a Euro-R Accord h22 single row crank pulley.

cannot be chipped or damaged in any way, would need to be shipped to Delaware, in the US.

This will be going on a 5th gen with an H22

Thanks!

Post by **NafemanNathan** » Mon Nov 12, 2012 8:39 am

I'm willing to ship, but check out the pictures...

http://www.ludegeneration.co.uk/prelude ... t3421.html

You'll be hard pushed to find one that isn't chipped (although I don't know how they do get chipped

) unless you buy new. You don't see many about at all. I've seen more Mugen bodykits pass hands on this forum and ebay than I have Euro-R crank pullies

As you're probably aware, the chip isn't large enough to impact the spinning mass, so should I just presume it's for a show car?

Edit: I could even get that particular rim with the chip in turned down just enough to loose the chip if you wanted. I work for an Aerospace/Honda contracting company, so I have the technology available

Wing8806 · Post by **Wing8806** » Mon Nov 12, 2012 12:53 pm

Thanks for the offer, but i'm really trying to find one that's not damaged. It would pretty much be for show since my bay is so open, but help greatly when pulling the engine in and out since my current pulley catches my EHPS line (which is mounted right next to it)

Yeah, no idea how every single one gets chipped. I've been looking for awhile and buying new is just last resort from Hmotors (asking around $175+ usdm)

Thanks again though!

Post by **NafemanNathan** » Mon Nov 12, 2012 1:00 pm

I was just going to slap this one on ebay soon as obviously no-one here wants it, but as I said, if you want it turned down that would solve your issue, and it'd be no extra cost.

Or just park up with the chip at the bottom