universal induction kit of some description

Post by **Donald** » Mon Jan 27, 2014 8:53 pm

Donald wrote:Find a decent filter that fits then make/buy your own piping.

Rob_Cool1 wrote: Yeah i know they both probably are :L you can get just the pipe without the filter so i might buy that and get a decent filter separate

NafemanNathan wrote:You could always make one up...

http://www.ebay.co.uk/sch/Vehicle-Parts ... c=50&rt=nc

There's even a couple blue ones at the end there

Rob_Cool1 · Post by **Rob_Cool1** » Mon Jan 27, 2014 9:02 pm

^^ im so sorry

Donald wrote:
Donald wrote:Find a decent filter that fits then make/buy your own piping.

Rob_Cool1 wrote: Yeah i know they both probably are :L you can get just the pipe without the filter so i might buy that and get a decent filter separate

I said that with your advice in mind

Post by **NafemanNathan** » Mon Jan 27, 2014 9:03 pm

You didn't put up a link or a pic Donald!

Post by **Donald** » Mon Jan 27, 2014 9:05 pm

I didn't realise this was a hand-holding forum

If it is who wants to be my partner? <3

Post by **NafemanNathan** » Mon Jan 27, 2014 9:08 pm

Batman was Robin's partner.

Post by **lewd lude lover** » Tue Jan 28, 2014 9:42 am

imo the piping looks Clubbing Eddy on those cheap ones. all those connections and gash? thats gonna look Clubbing Eddy and sound bum droppings. imho. A straight pipe and a good filter will see you right. Think to spend £80 or just leave it as it is because i guarentee you will only end up chucking that rubbish bits'a'apipe for something better and spend the money twice.

Post by **ADS1** » Tue Jan 28, 2014 11:46 am

I have a good condition cone filter for sale, if you want it. No pipework though.

Rob_Cool1 · Post by **Rob_Cool1** » Tue Jan 28, 2014 10:15 pm

lewd lude lover wrote:imo the piping looks Clubbing Eddy on those cheap ones. all those connections and gash? thats gonna look Clubbing Eddy and sound bum droppings. imho. A straight pipe and a good filter will see you right. Think to spend £80 or just leave it as it is because i guarentee you will only end up chucking that rubbish bits'a'apipe for something better and spend the money twice.

cheers for the advice. I've bought the pipes this morning before reading this though

Il put some heat wrap round it if i like it, i need to play around with fitting, so when i find the right shape that fits well i might get a pipe made. I've bought an apexi air filter so thats something good that ive got

should all be be here by next week so will fit it, take some pics and go from there lol

ADS1 wrote:I have a good condition cone filter for sale, if you want it. No pipework though.

Thanks for the offer

but bought one this morning

should check on here more often lol. thanks though!

Post by **NafemanNathan** » Tue Jan 28, 2014 10:25 pm

I wouldn't worry about what LLL said... Not that it's not valuable information, but as you're very limited in choice for your car (I don't know if there are any induction kits specifically for 2nd or 3rd gens

) you're not really left with any other option but to go custom, and unless you end up getting a carbon fibre custom job made up costing in excess of a lot of money, it leaves you with aluminium piping! I was lucky that my 3rd gen came with a one-piece one, but other than buying an ebay two-piece piped induction kit for £40, which looks like it incorporates the piece I have I don't know where you get them from. The only other issue is heat-soak, but the only induction kits that don't suffer from this are in excess of £150, so that just leave you with heat-wrapping it like you said. Think you've made the right choice

Rob_Cool1 · Post by **Rob_Cool1** » Tue Jan 28, 2014 11:16 pm

cheers, whats heat-soak lol? never heard of it

Yeah ive been trying to find one for ages, asked people from america and they said they went custom, or left it standard so yeah didnt have much choice haha. If i sort the rest of the car out and i have a bit of spare money il get one made in carbon

would look amazing lol. but this will have to do for now

Cheers