Dino's BB4 Prelude (Photos All Linked 31/07/18)

Dino · Post by **Dino** » Mon Sep 07, 2015 1:15 pm

Ratty... you are going to go a long way in life my friend!!

Dino · Post by **Dino** » Mon Sep 07, 2015 1:23 pm

Well its already started.. After a little bit of thought to get a few more ponies out of the car, there are a few things I am looking at getting/to fit. Now i dont have all these parts so if any of you can help me out, it would be appreciated

Engine management:
P28 with Hondata S300 (bought)

Fueling:
Warlboro 255lph fuel pump (bought)
Larger injectors 350cc mitsubishi eclipse or equivalent (need to source)

Intake:
70mm Throttlebody (to source)
Atr intake manifold (port matched to 70mm if poss)(to source)

So this is my next few bits i need to source over winter, fit and then get remapped. Hoping for around 270 ponies when finished

Post by **Merlin** » Mon Sep 07, 2015 1:34 pm

It will be great to see what you can squeeze out of the engine

Post by **Donald** » Mon Sep 07, 2015 1:37 pm

If he squeezed that buff chest into that top then I am also curious to see what else can go on with regards to squeezing.

Not hanging around with modding it then.

Post by **NafemanNathan** » Mon Sep 07, 2015 1:40 pm

And who's the guy in your rucksack?

Dino · Post by **Dino** » Mon Sep 07, 2015 2:19 pm

No hanging about... but these are the things i need to do next for progression.

Then ill have a look at the cosmetics

As for the man in the rucksack... he is what i carry around while doing walking lunges up the start grid

Post by **NafemanNathan** » Mon Sep 07, 2015 3:15 pm

Dino wrote:Then ill have a look at the cosmetics

Topping up that tan is surely first!

Dino · Post by **Dino** » Mon Sep 07, 2015 4:21 pm

cheers Nathan... ill remember that.

@wurlycorner Iain.. just bought a stormforce plus. Ill take some pics when it arrives

Post by **4thgenphil** » Mon Sep 07, 2015 10:53 pm

Someone found the biscuit tin!

Dino · Post by **Dino** » Tue Sep 08, 2015 11:18 am

Well shopping has started.
Got myself the 70mm throttlebody, injectors and portmatched 70mm atr intake manifold and a hondata intake manifold gasket.

Hopefully should receive next week.

Lude Generation

Dino's BB4 Prelude (Photos All Linked 31/07/18)

Re: Dino's 18th 4G Si-Vtec

Shopping List

Re: Dino's 18th 4G Si-Vtec

Re: Dino's 18th 4G Si-Vtec

Re: Dino's 18th 4G Si-Vtec