4thgenphils 4th Gen

mercutio · Post by **mercutio** » Sat Oct 27, 2012 9:09 pm

looking good phil

Post by **indigolemon** » Sat Oct 27, 2012 9:23 pm

4thgenphil wrote:the only reason those are blue is because they ran out of red ones, i have half red aswell

Nothing to be ashamed of, I'm sure many men suffer from this problem.

Post by **NafemanNathan** » Sat Oct 27, 2012 9:28 pm

Look alright

You do realise I'm going to have to add these to the list of groupbuys don't you?

johnm · Post by **johnm** » Sat Oct 27, 2012 9:43 pm

Brilliant build!
Just read through it all, brilliant!

Can't wait to get mine finished.

Post by **4thgenphil** » Sun Oct 28, 2012 11:04 pm

2 updates in 2 days!

here's one of my Guinea pigs,

worst, mechanic, ever!

and the hoard of parts

type s rear UCA's (note the reinforcement plates)

Type S front hubs with the double ball joints (its supposed to improve handling alot)

the front subframe and LCA's are of at the powder coaters, although i may use the 4th gen lower arms as the type s ones are longer and can bugger up the camber)

new 320mmx32mm front discs and 305mm rears

repaired HIRO front lip (this was in a really bad way)

In progress or being repair sides

Carbon spoiler (bought from mills(the super seller)) not sure if i will use it, i bought it just incase i do!

Carbon Boot

thats it for a few minutes!

no real progress, just trying to work alot of things out ATM and how it will all fit together

Post by **4thgenphil** » Sun Oct 28, 2012 11:09 pm

now for the thing i have been hiding, in plain sight, from the evil other half

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!ROLL CAGE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Who needs bolts?

This was, many moons ago, Performance autoworks's cage, it was then sold to jon e, then i-tuned, now its mine

just need a harness bar (hopefully tramroad will be making this) and fitting (again i would like it to be tramroad but getting the maroon heap there is going to be a PITA )

and yes i know my garage is a mess

Post by **NafemanNathan** » Sun Oct 28, 2012 11:13 pm

It's just like one of my posts!

Nice hoard

Post by **4thgenphil** » Sun Oct 28, 2012 11:19 pm

finally, a little engine stuff!

i wanted PA to do my head work, i had the cash, then the bloody roll cage came up!

i had a PNP'd head kicking around in the garage already (as you do) with supertech valve springs, retainers and flat faced valves (again as you do) the head wasnt a known quantity so i took it of to get refaced as it had a little damage on the face, turns out it had been skimmed before on the body lemonade, but now its flat! its had a fair bit of material taken off so i will have to check valve clearances, if they are goo then i should be getting some very strong compression

pics, everyone loves pictures

all this and a set of crower stage 3 n/a cams

thats it for today folks!

cheers

phil

Post by **4thgenphil** » Sun Oct 28, 2012 11:20 pm

NafemanNathan wrote:It's just like one of my posts!

Nice hoard

you dont include rodents

Post by **NafemanNathan** » Sun Oct 28, 2012 11:22 pm

No, I include cats

Lude Generation

4thgenphils 4th Gen

hiding crap from the missus, more carbon and a Guinea pig!

Re: 4thgenphils 4th gen lude and its brief history.

I love head!

Re: 4thgenphils 4th gen lude and its brief history.