Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
4th Gen BB4 Prelude VTEC ** Reduced £850 o.n.o **
- SpacePilotJohnLee
- Posts: 104
- Joined: Fri Oct 19, 2012 12:00 pm
- My Generation: 4G
- Location: Nottingham
4th Gen BB4 Prelude VTEC ** Reduced £850 o.n.o **
Sold
It is a 1994 BB4 (Options- No ABS/No Cruise Control/No Sunroof/No LSD. Has Climate Control & I have removed the Rear Wiper.)
During that time the car has had-
-Full respray in Pacific Blue Pearl inc. Left Quarter Panel replaced & Plated right rear arch & sills to remove the dreaded Prelude rust!!
-Replacement engine with new cam belt & 77,000 miles (due to bottom end going on old engine)
-Fidanza 8lb Flywheel
-Exedy Stage 1 Clutch
-Scorpion Full Stainless Exhaust with Decat Pipe
-AEM V2 Induction Kit
-New Distibutor
-Bosch S4 Battery
-Tein Coilovers
-Front & Rear Strut Braces
-Goodridge SS Braided Brakelines
It is regularly serviced, always using OEM Oil Filter, Mobil Super S/Super 2000 Oil & NGK Spark Plugs. Also I only use Shell V-Power fuel with it being a JDM import.
Bad points-
There is a small bubble on the right rear arch
Occasional knock on turning at slow speeds which I believe is a steering bushing
Speedo not accurate
Front Passenger wheel kerbed thanks to an idiot in an Audi speeding the opposite way forcing me into a kerb
Cheers for looking,
Adam
It is a 1994 BB4 (Options- No ABS/No Cruise Control/No Sunroof/No LSD. Has Climate Control & I have removed the Rear Wiper.)
During that time the car has had-
-Full respray in Pacific Blue Pearl inc. Left Quarter Panel replaced & Plated right rear arch & sills to remove the dreaded Prelude rust!!
-Replacement engine with new cam belt & 77,000 miles (due to bottom end going on old engine)
-Fidanza 8lb Flywheel
-Exedy Stage 1 Clutch
-Scorpion Full Stainless Exhaust with Decat Pipe
-AEM V2 Induction Kit
-New Distibutor
-Bosch S4 Battery
-Tein Coilovers
-Front & Rear Strut Braces
-Goodridge SS Braided Brakelines
It is regularly serviced, always using OEM Oil Filter, Mobil Super S/Super 2000 Oil & NGK Spark Plugs. Also I only use Shell V-Power fuel with it being a JDM import.
Bad points-
There is a small bubble on the right rear arch
Occasional knock on turning at slow speeds which I believe is a steering bushing
Speedo not accurate
Front Passenger wheel kerbed thanks to an idiot in an Audi speeding the opposite way forcing me into a kerb
Cheers for looking,
Adam
Last edited by SpacePilotJohnLee on Sun Feb 17, 2013 11:48 am, edited 5 times in total.
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
- SpacePilotJohnLee
- Posts: 104
- Joined: Fri Oct 19, 2012 12:00 pm
- My Generation: 4G
- Location: Nottingham
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
- SpacePilotJohnLee
- Posts: 104
- Joined: Fri Oct 19, 2012 12:00 pm
- My Generation: 4G
- Location: Nottingham
Hi, haven't posted in a while as I have been deciding what to do with the car.
The paint has come up with micro blistering on nearly all panels over the past few weeks.
I am pretty certain I will unfortunately have to break the car soon unless anyone is interested in the car as it is currently.
If anyone is interested in any parts please shout up, but if I do break it probably won't be till Feb/March as I am very busy with work at the moment.
Adam
The paint has come up with micro blistering on nearly all panels over the past few weeks.
I am pretty certain I will unfortunately have to break the car soon unless anyone is interested in the car as it is currently.
If anyone is interested in any parts please shout up, but if I do break it probably won't be till Feb/March as I am very busy with work at the moment.
Adam
Last edited by SpacePilotJohnLee on Fri Jan 11, 2013 11:46 pm, edited 3 times in total.