crankshaft pulley

taz8520 · Post by **taz8520** » Wed Jan 16, 2013 8:23 pm

Went to my dads workshop today to fit my exhaust yet again

, thought would check to crankshaft pulley, put line on it started engine, turned off then below was the result

Where can I get a new crankshaft pulley for my 2.2 lude,the motorfactors my dad uses don't stock one

Jozef has offered me a used one but would much prefer a new for piece of mind.

The "S" express · Post by **honda-hardy** » Wed Jan 16, 2013 8:36 pm

@nafemannathan

nitin_s1 · Post by **nitin_s1** » Wed Jan 16, 2013 8:39 pm

VTECdirect sells at at £150 for a new OEM one. Plus you would need the woodruff key which is like £14ish.

You can get those eBay lightened ones but I'm not sure about them.

I've had my pulley fail on my 2 times in the past two cars.

NCCMUR · Post by **NCCMUR** » Wed Jan 16, 2013 8:41 pm

Vtec direct does oem honda for £185 the last time i checked.

What is the problem cant tell from the picture?

nitin_s1 · Post by **nitin_s1** » Wed Jan 16, 2013 8:43 pm

Maybe the price has gone up then.

but better to get a brand new OEM one so worth it in my opinion.

The "S" express · Post by **honda-hardy** » Wed Jan 16, 2013 8:46 pm

was one white line accros both areas of the pulley, now the inner has slipped as the belt rotates, breaking the line.

nitin_s1 · Post by **nitin_s1** » Wed Jan 16, 2013 8:47 pm

Rubber perrished inside?

taz8520 · Post by **taz8520** » Wed Jan 16, 2013 8:48 pm

The ebay lightened ones need efferent belts I think, the problem is its wobbling and the inner rubber is not attached to the outer part

NCCMUR · Post by **NCCMUR** » Wed Jan 16, 2013 8:49 pm

honda-hardy wrote:was one white line accros both areas of the pulley, now the inner has slipped as the belt rotates, breaking the line.

Ahh! I see what you mean

not good

Post by **NafemanNathan** » Wed Jan 16, 2013 10:17 pm

honda-hardy wrote:@NafemanNathan

Mine's a Euro-R pulley, so only run the alternator I'm afraid.

Looks like he wants new anyway.

EDIT: I didn't actually get a PM from that tag by the way? If you editted it it doesn't work, you have to get it right the first time in case you didn't know