engine cuts out after starting

The "S" express · Post by **honda-hardy** » Thu Jan 24, 2013 10:03 am

my wife's car has developed a problem when starting. It cranks and runs. Idle then drops. So She touches the accelerator and it dies. F20a4 engine. Any ideas?

vtectom · Post by **vtectom** » Thu Jan 24, 2013 10:22 am

Sticking throttle body butterfly valve or idle air control valve?

Post by **NafemanNathan** » Thu Jan 24, 2013 10:28 am

Yeah, try accelerating it directly at the throttlebody.

Post by **Lude-dude** » Thu Jan 24, 2013 10:51 am

could be FITV?

does the 2.0i have fitv on the throttle body

The "S" express · Post by **honda-hardy** » Thu Jan 24, 2013 12:26 pm

what is the fitv?

Post by **NafemanNathan** » Thu Jan 24, 2013 12:32 pm

Fast Idle Temperature Valve

Post by **Lude-dude** » Thu Jan 24, 2013 12:34 pm

fast idle thrermo valve

under the throttle body, bolted to it

coolant flows through it, think it works on temp so now its cold you might be getting problems

could be clogged up or something, I know mine gets this problem but thats my own fault for changing the whole throttle body to remove it

Post by **NafemanNathan** » Thu Jan 24, 2013 12:41 pm

Shouldn't be cutting out though as soon as you touch the accelerator because of a FITV, if anything an open TB would help. Maybe the TPS is screwed ???

mercutio · Post by **mercutio** » Thu Jan 24, 2013 5:25 pm

check your earths

Dbo · Post by **Dbo** » Thu Jan 24, 2013 8:51 pm

Was going to say, all times I had problems with iacv and fitv always has shown as an eratic idle. Same with the tps lude never cut out just kept going from 500rpm to 1500rpm.
Have you checked the play in the cable? Has it streached maybe?