Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Are 4th gen lower ball joints the same front and back?
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
But I find the majority of ebay stuff isn't OE quality. At least I found that when hunting for drop links (And his drop links are definitely cheaper when comparing to the next OE quality ones) and ball joints for the 4th don't often come up either.
Then these items aren't usually all available from the same seller, so there's no usual way to knock the price (including postage) down even more.
Then these items aren't usually all available from the same seller, so there's no usual way to knock the price (including postage) down even more.
- vanzep
- Supporter 2016
- Posts: 6977
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 394 times
just thought id say the steering rack track rod ends visually look identical to the oem ones right down to the plated finish id stick my neck out and say good chance theyre from same manufacturer.
oem ones are £95 each so compared to £19.50 thats great value. just my opinion
sorry its a bit off track from the thread subject
http://www.ebay.co.uk/itm/honda-prelude ... 3a6baadb08
oem ones are £95 each so compared to £19.50 thats great value. just my opinion
sorry its a bit off track from the thread subject
http://www.ebay.co.uk/itm/honda-prelude ... 3a6baadb08
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
Not much time so just a quick post
4th and 5th gen front and rear lower ball joints are the same 110%
4th gen front and rear uppers are 33mm ball joints (OEM)
5th gen front uppers are 35mm and rears are 33mm (OEM)
Note - Some aftermarket replacement upper arms use their own size ball joint so this is where you can sometimes fall down
4th and 5th gen front and rear lower ball joints are the same 110%
4th gen front and rear uppers are 33mm ball joints (OEM)
5th gen front uppers are 35mm and rears are 33mm (OEM)
Note - Some aftermarket replacement upper arms use their own size ball joint so this is where you can sometimes fall down
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 122 times
- Merlin
- Moderator
- Posts: 12293
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 29 times
- Been thanked: 190 times
Quite possibly. Rich is on about diameter measurements (I assusme). Where I had problems was due to the the depth of the groove on the balljoint where the arm and circlip sits. To the unsuspecting eye my rear ones appeared to fit the front, it was only once we were building one side up what we noticed (by chance) vertical movement of the arm because of the slack fitting balljoint. I saw nothing on the arm to suggest that the arm wasn't OEM but It can only be that as my rear balljoint fit with no issue
I also found out that 5G'd dont fit, the hard way
I also found out that 5G'd dont fit, the hard way