3rd genners...

[NafemanNathan]

What length wipers are you using?

I'm running 18" Bosch Aeroblades (The ones I replaced were 18"), but the driver's side knocks the A-pillar on the up The wiper arms can't be adjusted any lower either. I've even bought a 16" blade to try and even that knocks.

Anyone know if there's any adjustment to be made cam linkage or anything under the skuttle panel?

[jjmartin349571]

My Accord does this too!! Drives me nuts will be interested to see if there's a fix for it

[NafemanNathan]

It knocks so hard I can feel it through the pedals!

The first time it happened I thought it was suspension related. Even had all four corners up in the air before a long journey the other weekend just to check

[RattyMcClelland]

Both of my 3rd Gens did this
Just got a smaller blade and adjusted the wiper arms settle position.

[NafemanNathan]

Yeah my settled position is so low that occasionally it knocks at the bottom just before it goes up

[honda-hardy]

nath, i sent you this guys page when you first got your 3g.

here is the site you need. check out the link "common problems"

look for Wiper Hits Window Molding Fix

http://mustardcat.brinkster.net/p3g/Frameset.htm


check the black tabs at the top of the page within the red bar for other great info.

[prelude91]

Mine does it too, Its always been fitted with the same spec. bosch blades as yours, so considered it normal, but no backlash through the pedals.

[honda-hardy]

all you need is here......


http://mustardcat.brinkster.net/p3g/Frameset.htm

[NafemanNathan]

Brilliant Sam, thank you. As I thought then

[honda-hardy]

Brilliant Sam, thank you. As I thought then but had no real idea as i was just clutching at straws

And now, angry ticks fire out of my nipples.