Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Green light around locker
Green light around locker
Does anybody have a problem with this light arround locker? Mine light is ON all the time and won`t turn off?
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
-
Onlinevanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
might not be connected but on both my 4 th gens the ignition barrel can stick a bit normally when it is cold weather - just give it a couple of gentle hits - another thought - could the ignition barrel stay on if the footwell lights (facelift 4th gen) stay on - there is a switch for the drivers footwell lights just at the side of it.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- firstlude
- Posts: 998
- Joined: Sun Feb 08, 2015 9:41 pm
- My Generation: 4G
- Location: tiverton devon
- Been thanked: 5 times
following on from vanzap my jdm soarer use to have the sticky barrel keeping the light on you , the key would come out ok but the central part of barrel didnt pop out quick lube up and all is fine , failing that has the wiring rubbed threw some where causing the light to be earthing all the time , do you have any other lights staying on
success is the ability to go from one failure to the next without any loss of enthusiasm


