5th Gen Passenger Side Rear Wheel Bearing Assembly

Post by **NafemanNathan** » Tue Apr 22, 2014 11:32 pm

Just watched a youtube clip on a 2006 Accord rear bearing removal and his just slipped off

Going to order two of these I think...

http://www.123spareparts.co.uk/car-part ... p-10092472

Post by **NafemanNathan** » Tue Apr 22, 2014 11:33 pm

nick_s wrote:I got mine from Click Car Parts, paid around £40 for the hub assembly (inc bearings) for mine

I checked there bud, but had a hard time finding anything

Mudgey · Post by **Mudgey** » Tue Apr 22, 2014 11:48 pm

I hope its easy as I've got mine to do tomorrow.

Post by **NafemanNathan** » Tue Apr 22, 2014 11:50 pm

Let me know how you get on

Incidentally, how much did/do you get yours for?

nick_s · Post by **nick_s** » Wed Apr 23, 2014 8:02 am

NafemanNathan wrote:How easy do these bearing assemblies pull off the spindles? Am I going to need a puller or will a good clout do?

Needed a puller for mine. Cheap enough in Toolstation though, think I paid like £15 for a set of three different sizes

nick_s · Post by **nick_s** » Wed Apr 23, 2014 8:04 am

NafemanNathan wrote:
nick_s wrote:I got mine from Click Car Parts, paid around £40 for the hub assembly (inc bearings) for mine
I checked there bud, but had a hard time finding anything

Their website is pants, but their customer service is spot on, give em a bell and they will sort you out fella

0871 297 5000, I dealt with Mat, but I dare say anyone will help you out

Alternatively, they are a trader on another forum I use, if you let me know your reg, I can ask them for a price and availability on your behalf?

Post by **NafemanNathan** » Wed Apr 23, 2014 8:24 am

Cheers Nick. I'll give them a call later on

Post by **Donald** » Wed Apr 23, 2014 10:15 am

Can't hurt to be prepared but I had no need with mine. Came off fairly easy.

Let us know if you find somewhere reasonably priced, I did one of mine with a used part about 15 months ago. No issues yet but that's probably jinxed it

Post by **SPYDOR** » Wed Apr 23, 2014 10:27 am

I managed to pull the rear right one of my car easily enough and replaced that bearing hub no problem but the rear left one was jammed on good so will need a bearing puller for that when I get around to it.

Easy enough to take the wheel and disc off and see if you can pry it off before needing to buy a puller I guess.

Post by **NafemanNathan** » Wed Apr 23, 2014 11:14 am

Yeah, if it's stubborn I'll just whizz of to Toolstation in the other half's car.