oilfilter relocation kit

lammy426 · Post by **lammy426** » Tue Sep 01, 2015 3:50 pm

anybody bought one of the alloy ones with m20 and 3/4" adaptors ,i'm after the 3/4 ones which you don't use on a prelude,thanks john

Post by **NafemanNathan** » Tue Sep 01, 2015 3:57 pm

Hey John,

What thread are you wanting to adapt from? Or is it just the extension piece you need?

Like this?...

http://www.ebay.co.uk/itm/Oil-Cooler-Fi ... 43df0dec1b

lammy426 · Post by **lammy426** » Tue Sep 01, 2015 4:06 pm

NafemanNathan wrote:Hey John,

What thread are you wanting to adapt from? Or is it just the extension piece you need?

Like this?...

http://www.ebay.co.uk/itm/Oil-Cooler-Fi ... 43df0dec1b

its not that mate,its the 3/4 fitting out of a kit like this one
http://www.ebay.co.uk/itm/151579881021? ... EBIDX%3AIT

bought the kit and it came without the 3/4 fittings and with the time difference and language barrier its like pulling teeth from china and i thought with hondas using the 20mm ones in the kit somebody on here will have the 3/4 ones in a draw somewhere

lammy426 · Post by **lammy426** » Tue Sep 01, 2015 4:08 pm

thread is 20 x 1.5 male tp 3/4 x 16 male and the other is 27 x 1.5 male to 3/4 x 16 female

Post by **NafemanNathan** » Tue Sep 01, 2015 4:20 pm

Ok, so just to clarify, you need one end to be 3/4"x16 male to screw into your block and the other end to be M27x1.5 male to screw into the adapter?

Or you could use a 3/4"x16 male x 3/4"x16 male to screw into the M27, which would do the same job?

That right? It is the block adapter we're talking about right?

lammy426 · Post by **lammy426** » Tue Sep 01, 2015 4:27 pm

its both ends i need it came without the fitting to go onto the block and the fitting which the reloated filter screws onto

lammy426 · Post by **lammy426** » Tue Sep 01, 2015 5:39 pm

http://s926.photobucket.com/user/lammy4 ... sort=3&o=0

number 1 is m27 x 1.5mm male to 3/4" x 16tpi female
number 2 is m20 1.5mm male to 3/4" x 16tpi male
hope this helps and somebody as them before i order more from china,many thanks john