Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Oil leak from betwwen engine & gearbox
- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 505 times
If you look at this pic it looks like its hondabond or similar that used to seal main plateMerlin wrote:I am pretty sure the main seal is leaking on my 4th gen, not the circular seal around the crank but rather the seal that goes round the plate.
When I changed my flywheel over the inside of the gearbox housing was manky with oil and and had contaminated the clutch plate too. At the end of this season everything that hasn't already been changed in there will be swapped out and the seal done as well.
Pic of the end of my crank and the main seal plate after I cleaned all the crud off.
http://www.ebay.co.uk/itm/Honda-Prelude ... 5673df922d
when we did my clutch i only looked at the round seal and as it was dry i thought it would be ok - i never thought to look at the seal around the plate

1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 505 times
yep ATR clutch is the way to go - fitted it about a year ago with no issues
little bit more bite than the prelude one but feel totally OEM.
a year ago it was £135 plus vat and the prelude clutch was £300+ both from Honda
like the others have said just go to your local Honda dealership say youve seen them at cox motors and they should match the price.

a year ago it was £135 plus vat and the prelude clutch was £300+ both from Honda
like the others have said just go to your local Honda dealership say youve seen them at cox motors and they should match the price.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC