Looking for a Gen3 MANUAL scrapper or similar.

CrunchyAdams82 · Post by **CrunchyAdams82** » Sat Jun 08, 2013 5:56 pm

Alright Peeps,

I'm going to be needing a manual Gen3 donor car for my planned H22 conversion at some point in the near future.

I've now got a 1988/H Auto Gen3 & need a manual one to harvest all the relevant parts from.

If anybody sees one about, I'd be interested in hearing about it.

Cheers.

Post by **indigolemon** » Sat Jun 08, 2013 5:57 pm

Can't you rob what you need from a donor H22 motor?

CrunchyAdams82 · Post by **CrunchyAdams82** » Sat Jun 08, 2013 6:08 pm

indigolemon wrote:Can't you rob what you need from a donor H22 motor?

Some parts certainly, but I'm going to need a few bespoke things like IP Dials, ECU (maybe), Pedal Box, OBD1 Conversion Harness, Gear Shifter & Linkages, Transmission Mount for manual, Throttle Linkages, Brake Sensor on pedal w/plug, Clutch Sensor on pedal w/plug, etc. And the list goes on..

So it's going to make the most sense me just getting a manual one that I can strip down. One that somebody is scrapping because of poor bodywork/welding issues for example.

Post by **NafemanNathan** » Sat Jun 08, 2013 10:58 pm

http://www.ludegeneration.co.uk/cars-br ... t7985.html

It's a facelift model though (not that that should matter for what you want) but I don't know whether it's a manual or not.

The "S" express · Post by **honda-hardy** » Sat Jun 08, 2013 11:02 pm

tiz auto.

Post by **NafemanNathan** » Sat Jun 08, 2013 11:17 pm

Aww shame.

CrunchyAdams82 · Post by **CrunchyAdams82** » Sat Jun 08, 2013 11:26 pm

Yeah, saw that one earlier as well. Like you say, shame.

'92 Si VTEC · Post by **jjmartin349571** » Sat Jun 08, 2013 11:38 pm

Just out of interest, is your Prelude on a private plate? I think H reg is 1991 as that's what my Golf is on, 1988 should be E reg like my Scirocco?

As for a donor, how much are you looking to spend? Car and Classic is usually good for older Hondas, I've seen a few sub £1,000 3rd gens come and go on there

Post by **Vtecmec** » Sat Jun 08, 2013 11:45 pm

Can't see you needing a full car as the only thing I can think of that you'll use is the clocks (but not essential), clutch and brake pedals.
Maybe the gear linkage, but the 3rd gen might not fit the h22 box and might be better off fabbing the later gen gear lever to fit.
You won't use the 3rd gen ECU.
You'll need the H22 engine loom.
The motor mounts will be aftermarket items.

The "S" express · Post by **honda-hardy** » Sat Jun 08, 2013 11:59 pm

its my old lude, its made in 88, and when imported to the country dvla registered it as 91H