Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

cutting my 1/4miles times.

Banter goes here, and doesn't have to be Lude related
User avatar
Bludge
Posts: 1115
Joined: Sat Mar 09, 2013 11:51 pm
My Generation: 4G
Location: Exeter
Has thanked: 2 times
Been thanked: 6 times

cutting my 1/4miles times.

Post by Bludge » Sun Aug 03, 2014 11:37 pm

i drag my lude every now and again, and i was hoping to hit 15 seconds dead or below yesterday, but the best i managed was 15.19. thats about 0.2 of a second faster then my best last time, but not the improvement i was hoping for after installing robs chip.

i have a tanabe limit ax mani, a hollowed out cat (i think, havent checked but emmisions test would indicate so), aem cone intake, stripped out boot, carbon bonnet, 2ws conversion, short shift adaptor.

my plans for the next drag meet are to swap out the bosch super 4s (yeah yeah, i know!!) for ngks platinums and fabricate a cold air funnel to the air filter from either the vents in thw front bumper (so i can run it all the time, maybe with something to close it over when its wet) or through a modified headlight.

im tempted to strip out the interior and just have a single bucket seat fitted, but i want it to be a road car still too.

can anyone suggest any other affordable mods i could be making to improve my times? im not wanting to spend a lot on it at the moment as i dont have the money, so im hoping for little things to try before possibly going down the boost route when i have the money.

cheers!

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Sun Aug 03, 2014 11:43 pm

tire pressure. lower the front pump the rear.

only stay in gear as long as you're producing torque.

warm engine but cold engine bay/intake temps...
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

User avatar
GreenyUK
Supporter 2014
Posts: 994
Joined: Fri Dec 06, 2013 7:28 pm
My Generation: 4G
Location: Bristol

Post by GreenyUK » Sun Aug 03, 2014 11:46 pm

As you've said mate. Weight! Just strip as much as you can. There will be a time were you have to choice road car or drag/track car :lol:
Image
Donald wrote:I think the best bet is to probably all try to enter together.

User avatar
Bludge
Posts: 1115
Joined: Sat Mar 09, 2013 11:51 pm
My Generation: 4G
Location: Exeter
Has thanked: 2 times
Been thanked: 6 times

Post by Bludge » Mon Aug 04, 2014 9:15 am

lewd lude lover wrote:tire pressure. lower the front pump the rear.

only stay in gear as long as you're producing torque.

warm engine but cold engine bay/intake temps...
didnt think of the tyre pressures thing! it feels like its producing torque right up to the redline, but im guessing its not optimal? whats the best way of finding out where to change? practice and feel or getting it on a rolling road?
GreenyUK wrote:As you've said mate. Weight! Just strip as much as you can. There will be a time were you have to choice road car or drag/track car :lol:
i really like my interior though! lol. i think im gonna strip it for the next drag meet and see how i get on with it for a couple weeks.

User avatar
Drax
Moderator
Posts: 6342
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 24 times
Been thanked: 431 times

Post by Drax » Mon Aug 04, 2014 9:20 am

@si import - he's the current king of the drag for ludes, ask him for tips ;)

im pretty atrocious at my starts :facepalm:
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Mon Aug 04, 2014 9:22 am

NGK plugs should do wonders over the Bosch. You'll be going from the worst plugs for our engines to one of the best.

Are you sure your cat's not just at the end of it's life? Not many hollow out a cat, and if they did you'd end up with a swirl effect which would hinder the cars breathing somewhat. Best get a proper decat on there.

4 bolts and your passenger seat will come out. That's some serious instant, temporary weight-saving right there ;-)

User avatar
W1ggz
Posts: 2524
Joined: Sun Jul 22, 2012 3:10 pm
My Generation: 4G
PSN GamerTag: W1GGZ
Location: Portishead nr Bristol
Contact:

Re: cutting my 1/4miles times.

Post by W1ggz » Mon Aug 04, 2014 9:42 am

Let me know when your next going buddy if like a go at this,
I take it you completely empty your boot before you go as well ? Spare wheel, jack, subs just removing the rear seats won't save you much weight unfortunately,
If you seriously want to save weight then it's a total strip I'm afraid as the easy thing to remove don't weigh that much other than the passenger seat,

Online
User avatar
Merlin
Moderator
Posts: 12394
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 69 times
Been thanked: 303 times

Post by Merlin » Mon Aug 04, 2014 9:44 am

Do you get any wheel hop when launching hard?
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Mon Aug 04, 2014 9:56 am

imho you cant take your road car on the strip with passenger seat and everything out of the boot and still call that time honest. For me the strip is a place to find out what I could do in a traffic light situation. As such you need the car to be as close to normal road going conditions as you can possibly be. That means all the extra you would normally carry. For sure do a run or two with everything removed but only as a comparisson to the real time you can get with the car 'honest' as it were.

you really nreed to rolling road to get an idea of torque production.
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Mon Aug 04, 2014 9:59 am

lewd lude lover wrote: you really nreed to rolling road to get an idea of torque production.
He tried that ;-) :lol:

But very good other point :)

Post Reply

Return to “General Chat”