Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

spoke to tuners today, here's what they say
- Teddy92110
- Posts: 119
- Joined: Thu Jan 08, 2015 4:40 am
- My Generation: 4G
- Lude-dude
- Moderator
- Posts: 2181
- Joined: Tue Aug 03, 2010 10:39 pm
- My Generation: 5G
- XBOX GamerTag: Vtec Junky
- PSN GamerTag: Rob7niner
- Has thanked: 3 times
- Been thanked: 3 times
naturally aspirated - NA

H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html
- Teddy92110
- Posts: 119
- Joined: Thu Jan 08, 2015 4:40 am
- My Generation: 4G
- Teddy92110
- Posts: 119
- Joined: Thu Jan 08, 2015 4:40 am
- My Generation: 4G
Im not too fussed about not having 4ws but when i was gonna buy my next one, it was going to be 4ws, but its so hardvto find a jdm with 4ws with facelift dash and fogs in the uk. Spoke to budget holdings in japan they also said they are very rare in japan also. So all you people with that particular car, hold on to what you've got cos you will never know what you had till its gone lol
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
What I actually said was... "If all you are after is a direct fit replacement for your failed/failing manifold and downpipe then a DC Sport header is a good option as the fit and quality is known. This will bolt up to your stock UK cat which you want to keep without any modifications. Minor gains will be achieved but that is all for this type of manifold."ATR84 wrote:My manifold and down-pipe also need replacing as there are holes in it, I spoke to Performance Autoworks, they said, of the "eBay special" type manifolds, the DC sports one is the best and you might see 5bhp gains from it. I am considering one of these.

- ATR84
- Posts: 975
- Joined: Fri Jan 27, 2012 1:53 pm
- My Generation: 5G
- XBOX GamerTag: mike84n
- Location: West Sussex
- Has thanked: 49 times
- Been thanked: 103 times
Cheers Rich.PerformanceAutoworks wrote:What I actually said was... "If all you are after is a direct fit replacement for your failed/failing manifold and downpipe then a DC Sport header is a good option as the fit and quality is known. This will bolt up to your stock UK cat which you want to keep without any modifications. Minor gains will be achieved but that is all for this type of manifold."ATR84 wrote:My manifold and down-pipe also need replacing as there are holes in it, I spoke to Performance Autoworks, they said, of the "eBay special" type manifolds, the DC sports one is the best and you might see 5bhp gains from it. I am considering one of these.
Seeing as I don't want to be messing about re-mapping ECU's and things, keeping things a stock size would probably be best for me. Sounds like the DC sports manifold and downpipe is the same diameter as stock and the Skunk 2 is 2.36 inch compared to 2.25 inch standard. So hopefully it will be ok?
