h22 torque

njord · Post by **njord** » Mon Jul 27, 2015 12:13 am

What do people think the maximum torque a n/a fully forged h22 engine will likey produce,

will it be over 250nm (189ft lb) or 420nm (310ft lb)

Post by **RattyMcClelland** » Mon Jul 27, 2015 12:32 am

Never above 200lbft. Even using a stroker kit. N/A and torque needs lots of displacement and cylinders.

njord · Post by **njord** » Mon Jul 27, 2015 12:46 am

Cool thanks

it seems hard to find out torque, bhp is easy but i want torque

njord · Post by **njord** » Mon Jul 27, 2015 12:48 am

So 190 ft lb is going to be hard to get out of the engine when its n/a

EG_H22 · Post by **EG_H22** » Mon Jul 27, 2015 6:22 am

Why not build the wngine up as much as u can, 250bhp is easy, then stick a nitrous setup on it take it to guy at cpl and let him work his magic?
You need to spend about £8-10k to achieve 300whp, on a 95mm crank setup.
Bc do a stroker kit for 100mm crank setup and 90mm pistons i think, but youd need sleeving on, and rosko have done a 99mm crank setup using the k24 crank which is the cheaper option.

Post by **Merlin** » Mon Jul 27, 2015 8:55 am

RattyMcClelland wrote:Never above 200lbft

I think you can with the right build. My 4th gens engine makes just under 190lbft and as things go my engine is tame.

Post by **NafemanNathan** » Mon Jul 27, 2015 10:53 am

EG_H22 wrote:rosko have done a 99mm crank setup using the k24 crank which is the cheaper option.

*Cough* http://www.ludegeneration.co.uk/post277044.html#p277044 *Cough*

EG_H22 · Post by **EG_H22** » Tue Jul 28, 2015 7:56 pm

Here u go for the people who think i get bhp and whp mixed up which i dont so here u go

http://honda-tech.com/drag-racing-36/h2 ... r-2914407/