Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Dino's BB4 Prelude (Photos All Linked 31/07/18)
-
- Posts: 1692
- Joined: Wed Jul 20, 2011 1:30 pm
- My Generation: 4G
- Location: Monmouth
- Has thanked: 1 time
- Been thanked: 8 times
Intake Manifold/TB & Injectors
Well the first of my parts have arrived.
To try and get the most out of the engine, I need to get the right amount of fuel and air into the engine.
Currently the car is on an OEM Intake manifold, Throttlebody & Injectors.
Currently the car is making about 250bhp and this is pretty much the limit of the what these OEM parts can take.
So before mapping I needed to get a few parts.
Thanks to @Drax, he pointed me in the direction of a package of what i needed.
So I managed to bag my self a 70mm Throttlebody, Port matched 70mm ATR Intake manifold fitted with EVO 550cc injectors and a Skunk 2 Intake Manifold Gasket.
After speaking to Rich at Performance Autoworks, It looks like these parts will be up to the job to get the car mapped even though the injectors are a little over spec'd.
So all I need to do now is get it fitted.


To try and get the most out of the engine, I need to get the right amount of fuel and air into the engine.
Currently the car is on an OEM Intake manifold, Throttlebody & Injectors.
Currently the car is making about 250bhp and this is pretty much the limit of the what these OEM parts can take.
So before mapping I needed to get a few parts.
Thanks to @Drax, he pointed me in the direction of a package of what i needed.
So I managed to bag my self a 70mm Throttlebody, Port matched 70mm ATR Intake manifold fitted with EVO 550cc injectors and a Skunk 2 Intake Manifold Gasket.

After speaking to Rich at Performance Autoworks, It looks like these parts will be up to the job to get the car mapped even though the injectors are a little over spec'd.
So all I need to do now is get it fitted.


Last edited by Dino on Tue Jul 31, 2018 11:06 pm, edited 3 times in total.
-
- Posts: 1692
- Joined: Wed Jul 20, 2011 1:30 pm
- My Generation: 4G
- Location: Monmouth
- Has thanked: 1 time
- Been thanked: 8 times
Re: Not My Prelude..Nafeman Says So :-(
Was on an EF civic with h22 conversion
[youtube]gpneOzoCO1c[/youtube]
[youtube]tbGSmNMX25E[/youtube]
[youtube]gpneOzoCO1c[/youtube]
[youtube]tbGSmNMX25E[/youtube]
Last edited by Dino on Thu Sep 24, 2015 10:15 am, edited 1 time in total.
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
-
- Posts: 1692
- Joined: Wed Jul 20, 2011 1:30 pm
- My Generation: 4G
- Location: Monmouth
- Has thanked: 1 time
- Been thanked: 8 times
Re: Not My Prelude..Nafeman Says So :-(
They are indeed Ratty... i had to take one off to get the perfect angle for the photo. I was also hoping you noticed my pink ice cream maker... its where i make and store my Dino cream Ratty Ice lollysRattyMcClelland wrote:Are those your flowery shoes?

- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times