H22 adjustable cam gear EXPERIENCE? (US Racing)

TheHondaTuner · Post by **TheHondaTuner** » Thu Sep 15, 2016 7:49 pm

Hey guys. Does any1 made good or bad experience with adjustable cam gears? After milling my head 1mm iam a half tooth off. (ive been told that its not normal, unfortunatly i didnt check that before milling)
US Racing Camgears are 80€ only. Iam afraid of extreme belt wear like soem old HKS gears caused.

Can anyone suggest me affortable camgears?

Post by **Drax** » Thu Sep 15, 2016 9:41 pm

ive run AEM ones for several years with no problems, an im using skunk2 ones in the new engine bu not experienced what their like tbh

Post by **Merlin** » Fri Sep 16, 2016 12:39 pm

The SK2 ones were fine on my built engine.

Post by **NafemanNathan** » Fri Sep 16, 2016 1:21 pm

The thing to worry about really is making sure there are enough bolts to ensure they're not going to slip. I've run SK2 Tuner cam gears with 6 bolts each, and I have a set of AEM Tru-Time gears with 5 bolts each to go on my new built motor. I'd be weiry of just 4 bolts and certainly wouldn't consider using 3 bolt ones.