Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Hmmm a bit smokey?...
- paul bristol uk
- Moderator
- Posts: 1896
- Joined: Wed Aug 04, 2010 11:51 pm
- My Generation: 4G
- Location: In a world of my own
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
cheapest option is change the oil pressure switch, over filling will NOT bring your oil light on, change the switch and if it flickers once again you have an oil pressure problem. blocked PICKUP pipe, ohhh PICKUP pipe what a nice word
or faulty oil pump or low oil pressure from an engine fault/intollerance . switch maybe pump probably 


if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
gotta be the switch then hasnt itNafemanNathan wrote:But it sounds and runs so healthy!

1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
I've not had my light on when it's dropped below the min line, but it definitely works as when my oil pump failed it came on. Just because the oil is just below the min line doesn't mean the pressure will drop low enough to put the light on. The light won't come on for over fill, it's just a simple low pressure switch.
Also, the oil pump has a pressure relief valve built in which is what got stuck open when my pump failed. This being present, if you over fill the prv will dump the pressure from the excess oil so it wont cause damage. Last thing to add, when I had my build PAW put 5.5l of oil in the 5L sump...
Also, the oil pump has a pressure relief valve built in which is what got stuck open when my pump failed. This being present, if you over fill the prv will dump the pressure from the excess oil so it wont cause damage. Last thing to add, when I had my build PAW put 5.5l of oil in the 5L sump...
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K

- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Blue Print would be a safe choice right? As aposed to the £46.01 + VAT Genuine Honda one right? Don't mind forking out for a Blue-Print one if it's not a definate cure.tramroadmotors wrote:cheapest option is change the oil pressure switch, over filling will NOT bring your oil light on, change the switch and if it flickers once again you have an oil pressure problem. blocked PICKUP pipe, ohhh PICKUP pipe what a nice wordor faulty oil pump or low oil pressure from an engine fault/intollerance . switch maybe pump probably
That's the right part code right?
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times

if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
- Lude-dude
- Moderator
- Posts: 2181
- Joined: Tue Aug 03, 2010 10:39 pm
- My Generation: 5G
- XBOX GamerTag: Vtec Junky
- PSN GamerTag: Rob7niner
- Has thanked: 3 times
- Been thanked: 3 times
mine did flicker a couple of times, then after a while it went poof
my engine light, is that oil light? could have been a shift light on my hondata
I think if you got a problem you would know about it, but worth checking oil pressure and compression/leakdown test

my engine light, is that oil light? could have been a shift light on my hondata
I think if you got a problem you would know about it, but worth checking oil pressure and compression/leakdown test

H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html