Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

vibration at 2.5k?

Engine/Gearbox questions and discussion
User avatar
Giomani
Posts: 144
Joined: Sun Apr 01, 2012 6:30 pm
My Generation: 5G
Location: Cornwall
Has thanked: 1 time
Been thanked: 2 times

vibration at 2.5k?

Post by Giomani » Thu Nov 15, 2012 7:28 am

Here is a mystery for you gurus of Lude :ugeek: .

It doesn't sound too bad, but when I'm reving down normally under load it sounds like there is a vibration noise coming from engine area when I drop to 2.5k. It doesn't happen above or below these revs or when reving up. I'm not feeling anything and apart from this slight sound everything runs smooth and purrs nicely. Any ideas cuz I can't make it happen and be looking in the engine bay at the same time... This is on my A8.
Image

BB3 UKDM 2.0i (The Beauty)
BB8 UKDM 2.2vti (The Beast)

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Thu Nov 15, 2012 8:32 am

Check your engine mounts and all belts and pullies.

User avatar
vanzep
Supporter 2016
Posts: 7142
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 305 times
Been thanked: 504 times

Post by vanzep » Thu Nov 15, 2012 8:40 am

It will be your exhaust - id put money on it
I had similar noise at 2.5k revs and it was loose bolt and washer at the manifold/downpipe area.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Thu Nov 15, 2012 9:11 am

every lude i have owned had a slight 'wobble at about 2.5k. you could only feel it if you held the revs real careful like, hit 2.5 and the car would gently 'wub' with the engine. If this sounds like your issue then dont worry. If its more than this then get in there and take a look ;)
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

User avatar
littlefeller
Posts: 1646
Joined: Sat Jan 28, 2012 6:19 am
My Generation: 4G
Location: evesham

Post by littlefeller » Thu Nov 15, 2012 9:19 am

vanzep wrote:It will be your exhaust - id put money on it
I had similar noise at 2.5k revs and it was loose bolt and washer at the manifold/downpipe area.
yep i second this, i have also noticed that if you have a hole in the system somewhere there is a sudden change of pitch at 2500 rpm on rundown, infact most cars do this with a hole in the pipe

User avatar
Giomani
Posts: 144
Joined: Sun Apr 01, 2012 6:30 pm
My Generation: 5G
Location: Cornwall
Has thanked: 1 time
Been thanked: 2 times

Post by Giomani » Thu Nov 15, 2012 10:30 am

Hmm, I do have a hole, but that's in the backbox (ongoing saga)

I'll check the rest of the zorst today cuz I have been bashing it around trying to get my back box and then the mid section off. (I've been defeated on both counts).

If its mounts/belts/pulleys, that might bring my belt change aspirations a little closer..

Thanks for the wisdom guys, ill let you know what I find.
Image

BB3 UKDM 2.0i (The Beauty)
BB8 UKDM 2.2vti (The Beast)

User avatar
Merlin
Moderator
Posts: 12393
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 68 times
Been thanked: 303 times

Post by Merlin » Thu Nov 15, 2012 10:33 am

Have you had your head in the engine bay while someone holds the revs at 2.5K?
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
mercutio
LotM Winner
Posts: 14958
Joined: Sun Aug 08, 2010 8:45 pm
My Generation: 5G
Location: Sunny Manchester
Has thanked: 1 time
Been thanked: 4 times
Contact:

Post by mercutio » Thu Nov 15, 2012 10:37 am

could be a loose heatshield or a damaged exhaust rubber or an engine mount on its way out
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens :D :lol:
Dino wrote:I loves the 5th gen really.... just dont quote me on it... ;)
4thgenphil wrote:Mines 4 1/4 unches mate, sorry

http://www.ludegeneration.co.uk/profile ... -t618.html

User avatar
Supermarine Blues
Posts: 729
Joined: Sat May 19, 2012 3:20 pm
My Generation: 5G
Location: Double wishbones, Hertford
Been thanked: 4 times

Post by Supermarine Blues » Thu Nov 15, 2012 11:09 am

lewd lude lover wrote:every lude i have owned had a slight 'wobble at about 2.5k. you could only feel it if you held the revs real careful like, hit 2.5 and the car would gently 'wub' with the engine. If this sounds like your issue then dont worry. If its more than this then get in there and take a look ;)
Having smoothed the engine up to that point, the balance shafts create an off-phase harmonic and the engine also 'sticks' slightly at those RPM due to the wasted power. I think it does it again about 5,000 and probably around 7,500, if you were that unsympathetic.

Of course, it also shakes your exhaust system too, and if it is getting a hole in the back box or loose baffles, it with then be most noticeable.

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Thu Nov 15, 2012 2:54 pm

^^^thats exactly what it feels like. glad iv not been fooling myself three cars on the trot. ;)
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

Post Reply

Return to “Engine / GearBox”