Charged K20a Prelude Type S

Post by **RattyMcClelland** » Mon Jan 14, 2013 11:57 pm

I don't see the potential a k20 will bring. Atts can handle power its high torque it hate. Like 250 lbft

stk prelude · Post by **stk prelude** » Mon Jan 14, 2013 11:59 pm

k20...... supercharged RATTY!!!!!!!!!!!

Post by **NafemanNathan** » Tue Jan 15, 2013 8:30 am

newkid wrote:From what I've read up on the mounts they can be used with a normal K20 as they do list the euro accord K20a

But they don't actually do any for a 5th gen though, so he'd still have to do some fabrication work just for the privilege of spending £600+ on mounts

Post by **Merlin** » Tue Jan 15, 2013 9:10 am

newkid wrote:Mudgey if I ever see you at a meet bud your welcome to actually facepalm me in person

Post by **rob quilter** » Tue Jan 15, 2013 9:15 am

Welcome aboard, looking forward to seeing how this project progresses.

mercutio · Post by **mercutio** » Tue Jan 15, 2013 9:42 am

does a type S have 4ws?

great build though buddy

EG_H22 · Post by **EG_H22** » Tue Jan 15, 2013 9:47 am

Dude this is going to be epic.

Will keep an eye on this

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Tue Jan 15, 2013 10:14 am

YES! Very nice route to go down indeed.

Looks like I'll be pipped to the post with the first supercharged prelude on here (wouldn't be too hard with my slow progress). The K20's, with the newer more efficient Eaton M62's + 9psi is always a safe 300bhp. Mine on the other hand will be an unsafe 300bhp.

I'm currently looking at a chargecooler design for mine using factory inlet chargecoolers from the likes of Jags, Landrovers, etc. Looks fairly easy to fab up for someone who can fab and tig weld. Looking at your inlet manifold, I think there's scope for you to do the same.

Can't wait to see how this progresses bud.

I would agree with the others to buy a standard 5th gen, switch the goodies over and sell the Type S on, but appreciate what your saying and it's your build.

Good luck with it.

Cheers,

Rob

Mudgey · Post by **Mudgey** » Tue Jan 15, 2013 12:00 pm

Yea I can't wait to get stuck in, dropped some more items off to the shot blasters today to get cleaned up ready for various types of coating so its slowly getting there!

The k20a does seem to have a high ceiling before any internal mods need to be done, there are quite a few people running 400whp with an unbuttoned stock engine for atleast a couple of years! Tho I have heard of a few people mention stripping gears at this power.

I forgot to mention that as I go along I will be selling everything I make as its cheaper to get 5 or 10 off of parts than just getting one made! (this is per unit). I should eventually have these parts available off the shelf:

Engine Mounts.
Alloy Radiator.
Alloy Rad hoses.
Gearbox Cable Bracket.
Accord Gearshift Mounting Bracket.

Fully documented but not stocked:
Drive shafts
Wiring conversion harness
Exhaust

Hopefully I will have enough info for the items immediately above that it will save people a hell of a lot of time to get these items made if they want too.

sha786 · Post by **sha786** » Tue Jan 15, 2013 12:01 pm

This has given me an idea.

Great job mate and good luck with it.

Lude Generation

Charged K20a Prelude Type S

Re: Charged K20a Prelude Type S