Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Wheels, offset, etc - advice please guys

Chassis/Brakes/Steering/Wheels discussion
User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Wheels, offset, etc - advice please guys

Post by nucleustylzlude » Tue Aug 27, 2013 1:22 pm

Right, I'm looking at another set of track wheels (yes, more! I know!) for the lude and I'm wondering if the specs will be way off.

They are 17" x 9J with a +22.5 offset. I know a couple of guys on here are going 9J with some arch rolling, other mods, etc. What do you think, am I daydreaming here or is it possible with whatever work? I've rolled arches now on my Mazda, so wouldn't shy away from rolling and flaring the arches. Might be able to get another 30mm clearance, 40mm with an aggressive flare.

@RattyMcClelland
@NafemanNathan
@cebul

Thanks for any help in advance,

Rob

User avatar
106pete
Posts: 1139
Joined: Wed Dec 01, 2010 9:38 am
My Generation: 4G
Location: Cornwall
Been thanked: 1 time

Post by 106pete » Tue Aug 27, 2013 1:30 pm

Rob I've just test fitted my 16x9 et50 rears and they don't look to bad, if anything the inner tyre clearance is more of a problem for me. Your extra 27.5 mm is goin to put ur lip outside of the arch on the rear, a slight stretched tyre and alot of arch rolling should just about clear.

I won't be able to fit them till next week so time will tell, I haven't even attempted them on the front but I'll try for you ;)
236bhp and 170ft/lb stock :whistle:

User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Post by nucleustylzlude » Tue Aug 27, 2013 1:39 pm

If you could bud that would be sound.

Yeah, as you say the inner clearance won't be too bad, as the extra width is eaten up by the offset and moved to the outer edge.

I guess cebul and maybe Ratty (if he fitted his) would know for certain having rolled and fitted some already.

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Tue Aug 27, 2013 1:42 pm

Well you've seen my Grenades trial fitted and they're 17x9J et +15 ;-) So not too too far from what you're looking at. Obviously means yours will be 12.5mm further inset, so have another look at my pics to give you a better idea...

http://www.ludegeneration.co.uk/post146 ... fe#p146129

I've not gotten around to lifting the wheels up in the arches to see how much I need to roll/cut yet, but it all looks doable to me :D

User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Post by nucleustylzlude » Tue Aug 27, 2013 2:26 pm

Mmm...forgot you'd posted pics.

I'll be honest its probably too much for me. Looks like the fronts will give you the most work, rears aren't too bad.

I've got my refurbed Volks for looks/shows and then a spare set for track days (Antera Stealths). So if I dumped the Antera's and got these, when swapping the Volks back, they'll just look stupid. Might give them a miss, but the wheels are :scaredtoss: :?

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Tue Aug 27, 2013 3:12 pm

Yeah swapping back will look daft if you don't match the extreme offset.

So what are these other wheels then? ;-)

User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Post by nucleustylzlude » Tue Aug 27, 2013 3:53 pm

Still contemplating it...if it's a no go I'll PM you - trust me, you'd want 'em. :wink:

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Tue Aug 27, 2013 3:57 pm

Aww now I really want to know! :lol: PM me anyway. I promise I wouldn't even consider them until you give me your blessing ;-)

User avatar
nucleustylzlude
Moderator
Posts: 4013
Joined: Wed Aug 11, 2010 11:46 pm
My Generation: 4G
Location: Bristol, UK!
Been thanked: 7 times
Contact:

Post by nucleustylzlude » Tue Aug 27, 2013 4:22 pm

NafemanNathan wrote:Aww now I really want to know! :lol: PM me anyway. I promise I wouldn't even consider them until you give me your blessing ;-)
Image

Image

Image

Image

Image

Image

Image

Image




:?

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Tue Aug 27, 2013 4:29 pm

:lol: Love the shopping trolley one!

Are they even 5 bolt? ;-)

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”