IAC Valve picture?

Post by **Pushki** » Tue Jan 31, 2012 9:35 pm

Does anyone have a good clear picture of the IAC Valve please?

Post by **NafemanNathan** » Wed Feb 01, 2012 7:23 am

Post by **Merlin** » Wed Feb 01, 2012 9:00 am

Attached to the engine?

Post by **vanzep** » Wed Feb 01, 2012 9:18 am

Here you go Pushki

Post by **Pushki** » Wed Feb 01, 2012 11:38 am

Thank you vanzep.

Merlin wrote:Attached to the engine?

If you have one.

Post by **Merlin** » Wed Feb 01, 2012 11:40 am

What info are you after?

Post by **Pushki** » Wed Feb 01, 2012 11:46 am

I was thinking about cleaning mine, not because it's sticking but just for reassurance.

JayJay · Post by **JayJay** » Wed Feb 01, 2012 11:50 am

Well, I cleaned mine before I had the manifold fitted, and after the manifold was fitted my idle is a constant 1000 RPM, never changes. Not sure if something is bust inside or they didn't fit it correctly (they're a good garage so I'm sure they fitted it fine...

)

So I'd recommend leaving it if it's working!

Post by **Merlin** » Wed Feb 01, 2012 11:53 am

JayJay wrote: So I'd recommend leaving it if it's working!

I would reccomend this also, there are little rubber o-rings in there to be lost or damaged if you open it up.

Post by **Pushki** » Wed Feb 01, 2012 11:56 am

Isn't that a good thing that your idle is constant?

Okay, I'll leave it alone.

What about the FITV? Should I clean/adjust that?