Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Headlight Removal
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times
Headlight Removal
If I want to remove the headlights, do I need to remove front bumper first, or is everything easily accessible without removing the front bumper ? I know it's pretty easy to get the bumper off, but I'd rather not, as I've just had it resprayed and it's fitting nicely, so don't want to disturb it
- vanzep
- Supporter 2016
- Posts: 7046
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 274 times
- Been thanked: 448 times
its a bumper off job normally - there are three lower bolts which need to be removed - one underneath the side light is tucked away between the front wing and bumper - might be able to remove it if the front wing was taken out
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times
To be honest, when I swapped the bumper, I had to 'rip' the old one off, as it was held on with 2 clips that were under the headlights (one under each headlight), and I couldn't get the headlights off. So, if you need bumper off to get headlights off and headlights off to get bumper off.... erm.... too much for my little brain.....Drax wrote:Need to loosen/remove the bumper bar as well, depends how you remove the bumper really as the best method is to remove it with the bar attached... I've never tried this successfully though lol
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21354
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2226 times
- Been thanked: 279 times
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times