Has anyone got a 4WS ECU going spare??
Mine keeps popping the light on and the only way to get it working is to disconnect the battery for a few seconds. Then all is well for a variable length of time! (Could be the next time I start it, or could be a month, until it goes wrong again)
I've had the ECU out twice in the past to check and resolder dry joints but it's not helped, and in the last year it's getting worse (happening more often) and getting very irritating.
Does anyone have a known working ECU available?? Not sure what these go for, so send me your offers!
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

WTD: 4WS ECU
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2484 times
- Been thanked: 307 times
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21496
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2484 times
- Been thanked: 307 times
- Gayno
- Lord Gayness
- Posts: 5479
- Joined: Sun Sep 19, 2010 4:41 pm
- My Generation: 4G
- Location: Stourport, Worcs
- Has thanked: 4 times
- Been thanked: 17 times
- Contact:
Mine decided to fail today when we were leaving Silverstone. Normally I carry a 10mm spanner so I can disconnect the battery in such cases, but I tidied out the car last weekend and didn't put it back in
Luckily though the positive terminal was loose enough that I could work it off then back on which did the trick. Otherwise that would've been an interesting 2 hour drive home

Luckily though the positive terminal was loose enough that I could work it off then back on which did the trick. Otherwise that would've been an interesting 2 hour drive home
