Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Tim's BB4

Tell us all about your Lude, you know you want to ...
Post Reply
Tim
Posts: 10
Joined: Sun Apr 07, 2019 8:22 pm
My Generation: 4G
Been thanked: 7 times

Tim's BB4

Post by Tim » Sat Dec 30, 2023 5:53 pm

Transferring myself over from the new members post.

Very happy to be ending the year with a MOT pass :D

Failed first time around on emissions. Talking to the garage they were giving it a full cat emissions test, but my understanding is that as a pre-95 import the BB4 model is not in the emissions standard book so should be given an easier emissions test. If anyone knows for sure I'd be interested to know.


User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21224
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1968 times
Been thanked: 240 times

Tim's BB4

Post by wurlycorner » Sat Dec 30, 2023 6:42 pm

Hi Tim
Good news on the pass.
That's correct - a BB4 should be tested to non-Cat emissions standard.

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

Tim's BB4

Post by Drax » Tue Jan 02, 2024 9:30 am

great to hear Tim! keep any updates to the car coming, big or small :thumbup:
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
toadster
Posts: 1858
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

Tim's BB4

Post by toadster » Wed Jan 03, 2024 10:51 am

Lo :D
Great stuff :thumbup:
Cheers ;)
Toadster
Image

Tim
Posts: 10
Joined: Sun Apr 07, 2019 8:22 pm
My Generation: 4G
Been thanked: 7 times

Tim's BB4

Post by Tim » Wed Apr 03, 2024 5:17 pm

First breakdown of the year, the starter motor stuck with no advance warning. At least it was at home at the time. Looked accessible but the bottom bolt needed a big extension. When taking the expansion bottle off found the rubber tube was split and the plastic pipe was blocked, lucky to spot those at the same time. Then the battery retaining clamp was threaded, took one off a sleeping Hillman Avenger which fits nicely.

Come to use the car yesterday and the engine light came on almost immediately :crazy: pass me a paperclip


User avatar
JEBB4
Supporter 2014
Posts: 1225
Joined: Tue Feb 18, 2014 7:28 pm
My Generation: 5G
Location: Australia
Has thanked: 78 times
Been thanked: 63 times

Tim's BB4

Post by JEBB4 » Thu Apr 04, 2024 11:35 am

:thumbup: Nice work
What fault code did you get?
Jamie P 2013 wrote:i like tits :D
My BB6 build
viewtopic.php?f=17&t=54187

My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866

My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321

Tim
Posts: 10
Joined: Sun Apr 07, 2019 8:22 pm
My Generation: 4G
Been thanked: 7 times

Tim's BB4

Post by Tim » Fri Apr 05, 2024 2:01 pm

Code 41 was the new one. Thinking back, I topped up the clutch fluid right before it came on, I had a look to see if I disturbed any wiring but can't see anything obvious. Also have code 17 regularly as the speedometer connection drops.

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

Tim's BB4

Post by Drax » Fri Apr 05, 2024 3:59 pm

error codes
kb/viewarticle?a=4

17 - VSS: Vehicle Speed Sensor - P0500 (circuit malfunction), P0501 (range/performance)
41 - Primary Oxygen Sensor Heater (HO2S) - P0135 (circuit malfunction), P1166 (system electrical), P1167 (system)
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Online
Scott560
Posts: 1329
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 215 times

Tim's BB4

Post by Scott560 » Sun Apr 14, 2024 4:40 pm

I have found that previously if the starter motor gets stuck on / doesn't disengage, it can play funny buggers with the voltage and make the car throw a few codes. If disconnecting the battery for an hour and a bit of driving doesn't clear any of the codes then it could well be true (whether caused by the starter issue or not - if you haven't driven the car much faults might just start to crop up coincidentally).
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Post Reply

Return to “Lude Profiles”