Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

New, Gen 4 Prelude H23

New member? Introduce yourself here!
User avatar
bristol_bb4
LotM Winner
Posts: 3369
Joined: Mon Oct 10, 2011 2:19 pm
My Generation: 4G

Post by bristol_bb4 » Mon Oct 21, 2013 5:45 pm

EthanH23 wrote: peek at what else people have done!
most of the decent ones are tucked away in gardens or garages half finished :lol:
Image

EthanH23
Posts: 24
Joined: Sun Oct 20, 2013 6:25 pm
My Generation: 4G
PSN GamerTag: Ethan300ZX

Post by EthanH23 » Tue Oct 22, 2013 3:04 pm

Done the diagnostics this morning, I got a code 35 on the 4WS, I looked that up and it says Wheel Speed Rear L3 CU.... There was also an ABS fault, it was section 4, fault 8. That one said Rear Left Speed Sensor..... Am I guessing its just a speed sensor on the rear left that needs replaced to fix both these faults?

Also, is rear left the driver, or passenger side? :lol:

Also, the engine management light came on when I done the diagnostics, it didnt flash, it just stayed on, does that mean anything? And the SRS light flashed continuously, in no pattern.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Tue Oct 22, 2013 3:13 pm

Don't worry about the CEL (engine management light) or SRS. When you bridge the connector, it puts all the ECU's into fault code read mode.

Yep, one sensor will fix both faults, as suspected.

:? I've forgotten for sure which is left and which is right. I think it's as you're sat in the drivers seat, so left would be passenger side :?
But anyway, your best bet is to double check it's the sensor rather than the harness anyway, by getting under the back of the car, unplugging the sensor (orange plug in board of the suspension) and continuity checking across the pins to confirm it's u/s, rather than the harness.
nb: it will be the sensor 99.99% of the time, but the one time you don't test it, will be the one time it's the harness :lol:

EthanH23
Posts: 24
Joined: Sun Oct 20, 2013 6:25 pm
My Generation: 4G
PSN GamerTag: Ethan300ZX

Post by EthanH23 » Tue Oct 22, 2013 3:24 pm

Thanks for the quick answer there, I've just had a quick google... Is there anywhere online I can order a second hand speed sensor, or am I gonna have to trawl the scrap yards?

Ill have a check on the harness to make sure its not that, thanks for the tip!


EDIT:

Is it one of these? http://www.amazon.co.uk/92-05-SENSOR-Ac ... B002NT1R6W

User avatar
indigolemon
The Chaos Engine
Posts: 6680
Joined: Wed Jun 30, 2010 1:45 pm
My Generation: 4G
PSN GamerTag: M149YSL
Location: Kelty, Fife
Has thanked: 24 times
Been thanked: 71 times
Contact:

Post by indigolemon » Tue Oct 22, 2013 3:43 pm

Hey man, welcome in - the wheel speed sensor looks like this: http://www.ebay.co.uk/itm/1992-1996-HON ... 257b0fff29

Shove a wanted post up in the 'wanted' section of the forum!
'On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.' - Charles Babbage

User avatar
mills
LotM Winner
Posts: 1995
Joined: Fri Oct 29, 2010 12:16 am
My Generation: 5G
XBOX GamerTag: mills1705
Location: Birmingham
Has thanked: 4 times
Been thanked: 8 times

Post by mills » Tue Oct 22, 2013 5:38 pm

Welcome to LG buddy :Hello:

User avatar
mart609
LotM Winner
Posts: 3354
Joined: Sun Aug 08, 2010 10:22 pm
My Generation: 4G
XBOX GamerTag: mart609
PSN GamerTag: mart609
Location: Dudley, West Mids
Has thanked: 9 times
Been thanked: 14 times
Contact:

Post by mart609 » Sun Oct 27, 2013 3:41 pm

Hi and welcome

Post Reply

Return to “New Members”