new parts fitted and need help!!!!!!!!

Dbo · Post by **Dbo** » Wed May 22, 2013 10:49 pm

wish there was a way i could get that bonnet from you m8

mine is scared up under the wrap and have been looking for another to re-wrap, was going to have crunchy's before Paul wanted it

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu May 23, 2013 12:49 am

Have you re-tried getting the codes out of the ecu since re-setting?

Post by **paul72** » Thu May 23, 2013 7:37 am

Hi im down in ilminster area , i would of had that bonnet if i know althou this one still has few marks on it .
I did try codes again and it still shows one flash 3 times even after battery off

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Thu May 23, 2013 11:01 am

Shame on the bonnet front, dbo you're more than welcome to have it if you can get it. I was actually in Southampton on Tuesday for work but only solution is strapped to a roof rack I have.

I'll hold onto it for a short while if you do want it. Would seem a waste to cut it up and bin it.

Paul - as for your ABS fault, I've only seen this fixed one way - replacing the main ABS unit in the engine bay. All others have either removed ABS, like me! (Not an easy job) The second option, but not a fix is to simply removed the bulb or wire the bulb up to another light that comes on and goes off when you switch the ignition on. Most MOT testers won't even check for these lights, but you may end up with the guy that does!

Not ideal if you want to retain the ABS for safety reasons, but will get you through the MOT. If you need help getting to the dash lights just shout. There is a how to on here for wiring up a VTEC light, which shows how to remove all the trims to get to them - See the Guides / How to section.

Post by **paul72** » Thu May 23, 2013 1:32 pm

Cheers mite take you up on that bonnet if i cant get these last marks out .
Thats a good idea about wiring bulb to another i never thought of that , im changing all the lights at weekend for a blue dash that i hope works as not tested yet so mite try changing abs light then as brakes are still good enough

Dbo · Post by **Dbo** » Thu May 23, 2013 4:15 pm

i am good with ethier bonnet

as it would be wrapped anyway

just a case of how to get it

would look funny strapped to my roof with no rack

just a project i want to try some black/blue carbon wrap

Post by **paul72** » Thu May 23, 2013 4:27 pm

Yeah i seen some 4d gloss carbon wrap on ebay works out about £37 to do bonnet as i was thinking about it but after trying to wrap a boot before it went badly wrong on the bends

bb1boy · Post by **bb1boy** » Thu May 23, 2013 6:05 pm

paul72 wrote: ...it went badly wrong on the bends

heat and stretch, my friend, heat and stretch...

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Fri May 24, 2013 10:25 am

bb1boy wrote:
paul72 wrote: ...it went badly wrong on the bends
heat and stretch, my friend, heat and stretch...

I bet that's what you say to all the ladies.

Well the bonnets here if either you or dbo can collect it. Just PM me if and when.

bb1boy · Post by **bb1boy** » Fri May 24, 2013 10:31 am

nucleustylzlude wrote:
bb1boy wrote:
paul72 wrote: ...it went badly wrong on the bends
heat and stretch, my friend, heat and stretch...
I bet that's what you say to all the ladies.

haha nah, I usually just say, "Shut up and get in the van"