Looking for 4th gen parts

[Gavyb]

Hi all new to the group looking for a few bits mainly windscreen surround rubber also the strip at the bottom of rear window and two weather strips at the bottom of driver and passenger windows

[vanzep]

Welcome to LG
Most 4g get a new replacement rubber for the front windscreen from Rejel Automotive in Bedford.
It is listed as a 5th gen part(1997-2000) but fits 4th gens and does away with all the plastic trim that the 4g windscreen has.
It is Rejel part number 3961WMC and should cost under £50
You can find rejel online at www.rejel.com or call them on 01234 273388

The rear window lower trim is still available from Honda and has all the clips so fitting it is easy. expect to pay about £80 for this part from Lings or local Honda dealer.
The door scrapers - i think they are also available from Honda at about £90 ea - youd be lucky to find second hand ones and they would probably have chips out of them. I have a passenger side one thats fairly good. I use black electrical tape along the whole length of the window scraper to hold them together and it looks ok

Hope this all help

[Gavyb]

Welcome to LG
Most 4g get a new replacement rubber for the front windscreen from Rejel Automotive in Bedford.
It is listed as a 5th gen part(1997-2000) but fits 4th gens and does away with all the plastic trim that the 4g windscreen has.
It is Rejel part number 3961WMC and should cost under £50
You can find rejel online at www.rejel.com or call them on 01234 273388

The rear window lower trim is still available from Honda and has all the clips so fitting it is easy. expect to pay about £80 for this part from Lings or local Honda dealer.
The door scrapers - i think they are also available from Honda at about £90 ea - youd be lucky to find second hand ones and they would probably have chips out of them. I have a passenger side one thats fairly good. I use black electrical tape along the whole length of the window scraper to hold them together and it looks ok

Hope this all help

Thanks for the response
That’s good to know I’ll try that crowd for the windscreen rubber. I’ll try that trick with the tape it should get me away for now. I was also looking for a Hiro front lip or something similar I have the skirts and back wings

[vanzep]

no worries
wurlycorner had a front lip for sale a while back
wings west or spoon style lips are popular as they are made of poly so withstand the bumps and scrapes
genuine mugen,actez,value sports and other fibreglass front lips are very rare to find

[wurlycorner]

I'm getting deja vu from this post... I wrote a reply to this the other day, but looks like I didn't post it, or something (because it's not there now!)

Vanzep has covered most of what I'd written of course!
The only thing I would say in relation to the trim at the bottom of the rear window, is that in my experience fitting a brand new OEM trim isn't actually a very long lasting solution - within a couple of years the paint will have crinkled up and gone matt looking, all over again. If that's the only problem with it, then it's probably just as good to rub back, prime and re-paint your old one. Just need to use a decent etch primer in order to get decent adhesion to the metal.

[Gavyb]

Sorry that was my fault when I set up I went to new members to post then after I thought I should probably post in the wanted section I did get your response on the other post though ...have you any idea what the shipping on that front lip would be to Ireland?