Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

No vetc help!!

Engine/Gearbox questions and discussion
Post Reply
Screm161
Posts: 1
Joined: Wed May 03, 2017 2:02 pm
My Generation: 4G
PSN GamerTag: Screm161

No vetc help!!

Post by Screm161 » Wed May 03, 2017 2:09 pm

Ok really sorry if this is the wrong place but as it's the engine you guys know so much about I'm kinda hoping someone can help me.
Just recently I have received a civic eg in px it has a h22a conversion stamp year 92. It has a p13 ECU but as of using it there is no vtec and also and revs round to around 6500rpm does have egr and knock sensor delete car runs find apart from when you try hitting VTEC have cleaned and checked solenoid just don't really know where to start with it was just kind of hoping someone might be able to point me in the right direction and before you ask it's not a new conversion was done back in 2010 so everything worked fine up until the previous owner

User avatar
4thgenphil
Supporter 2016
Posts: 6661
Joined: Tue Aug 03, 2010 4:15 pm
My Generation: 4G
Location: filming two girls one cup 2
Has thanked: 5 times
Been thanked: 29 times

Post by 4thgenphil » Wed May 03, 2017 8:11 pm

Is your speedo working?
:thumbdown:

spudep91
Posts: 1127
Joined: Fri Jul 27, 2012 6:23 am
My Generation: 4G
PSN GamerTag: starletgt123
Has thanked: 3 times
Been thanked: 5 times

Post by spudep91 » Thu May 04, 2017 11:17 am

Lol were having same problem. We haven't got the speedo drive plugged in or temp gauge doesn't want to read something must be wired wrong. Putting down to the 2. Let me no if you get it sorted pal

Free Ranj Egg
Posts: 609
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 8 times

Post by Free Ranj Egg » Fri May 05, 2017 4:17 pm

Most likely the speedo mate. I had an import 4th gen and the speedo was converted from kms to miles. The guys who had it before didn't know what it was and ripped the little box out. Speedo didn't work and the car went into limp mode which dropped the revs.

Brought another little converter box and installed it and I had vtec back.
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21493
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2481 times
Been thanked: 306 times

Post by wurlycorner » Sun May 07, 2017 1:35 pm

Welcome
No problem at all asking up on here for info, we're always happy to help where we can.

When you say 'knock sensor delete' what do you mean? (What has been done there)

Did this problem start while the previous owner had it, or just after they sold it to you?

Are there any fault codes logged by the ECU?

Things that need to be right to get vtec to engage;
Road Speed
Engine Speed
Engine Oil Pressure (detected at the VTEC Oil Pressure Switch on the side of the head)
Engine Temp

Post Reply

Return to “Engine / GearBox”